High Performance Liquid Chromatography system (HPLC) refers to a technique in analytical chemistry that is used to identify, separate and quantify each component in a mixture. C8 and C18 both refer to the alkyl chain of a bonded face of a column. They are both used in the high performance liquid chromatography system. The two columns have some similarities, but they are also different in some way. Some of the differences between C18 and C8 are discussed here.
C18 is denser than C8. The denser parking will increase the surface area that the molecule in a mobile phase has to travel through per unit length. It will also increase the time of interaction within the elitues and stationary phase causing a greater separation ability for more complex molecules.
In other terms, C18 has Octadecyl chains which are usually hydrophobic and highly retain nonpolar compounds. The length of its carbon chain is longer. On the contrary, C8 has Octyl chains and hence it is less retained when used with the same compound as C18.
When a short retention time is required, C8 is more preferred. Its lower hydrophobicity will cause faster retention of nonpolar compounds. Therefore, nonpolar compounds will move down the column more rapidly with C8 than with C18.
Related: HPLC Column Performance Evaluation and Column Care
C18 is considered better for separating compounds such as long-chain fatty acids as compared to relatively small organic compounds. It is relatively cheap as it is produced in large amounts by most manufacturers.
C8 and C18 have a lot of elements in common. However, extensive research has helped to identify some of the distinctive differences of C8 and C18 used in HPCL. The two compounds have a structure that is almost similar. That is, for C18 is OH-Si-C18 and for C8 that is OH-Si-C8.
Related: Steps for HPLC Method Development
C18 is denser than C8. The denser parking will increase the surface area that the molecule in a mobile phase has to travel through per unit length. It will also increase the time of interaction within the elitues and stationary phase causing a greater separation ability for more complex molecules.In other terms, C18 has Octadecyl chains which are usually hydrophobic and highly retain nonpolar compounds. The length of its carbon chain is longer. On the contrary, C8 has Octyl chains and hence it is less retained when used with the same compound as C18.
When a short retention time is required, C8 is more preferred. Its lower hydrophobicity will cause faster retention of nonpolar compounds. Therefore, nonpolar compounds will move down the column more rapidly with C8 than with C18.
Related: HPLC Column Performance Evaluation and Column Care
C18 is considered better for separating compounds such as long-chain fatty acids as compared to relatively small organic compounds. It is relatively cheap as it is produced in large amounts by most manufacturers.
C8 and C18 have a lot of elements in common. However, extensive research has helped to identify some of the distinctive differences of C8 and C18 used in HPCL. The two compounds have a structure that is almost similar. That is, for C18 is OH-Si-C18 and for C8 that is OH-Si-C8.
Related: Steps for HPLC Method Development
- C18 has 18 carbon atoms while C8 has only 8 carbon atoms.
- C18 has a longer carbon chain, but C8 has a shorter one.
- C18 has higher retention while C8 has shorter retention.
- C18 has higher hydrophobicity, but C8 has a lower hydrophobicity.
Hello guys myself Kundan kumar q.c officer in Pure&Cure(Akums)Haridwar
ReplyDeleteI want to say this application is very use full for people's surviving in pharma sector
Thanks
Thank you for your information about teh HPLC and RP-HPLC
ReplyDelete