Parenteral Added Substances : Pharmaguideline
  •   Pharmaguideline Courses Enroll Now
  • Dec 10, 2012

    Parenteral Added Substances

    The details and quantities of substances added in the parenteral pharmaceutical products.

    Introduction:

    Added substance or additives are generally employed in a parenteral preparation to enhance its chemical or physical stability, i.e., shelf life or esthetic appearance. To provide efficacious and safe parenteral dosage forms, added substances must frequently be incorporated into the formula to maintain pharmaceutical stability, control product attributes, ensure sterility or aid in parenteral administration. 

    Criteria for added substance:

    • must be prevented from adversely affecting the product
    • must be nontoxic in the quantity administered to the patient
    • should not interfere with the therapeutic efficacy nor with the assay of the active therapeutic compound
    • must also be present and active when needed throughout the useful life of the product

    Types of parenteral additives:

    Parenteral Products
    1. Antimicrobials
    2. Antioxidants
    3. Buffers
    4. Bulking agents
    5. Chelating agents
    6. Protectants
    7. Solubilizing agents
    8. Surfactants
    9. Tonicity adjusting agents
    10. Antifungal agents
    11. Hydrolysis inhibitors
    12. Antifoaming agents
      

    1. Antimicrobial agents:

    A suitable preservative system is required in all multiple-dose parenteral products to inhibit the growth of micro-organisms accidentally introduced during withdrawal of individual doses. Preservatives may be added to single-dose parenteral products that are not terminally sterilized as a sterility assurance measure, i.e., to prevent growth of any micro-organisms that could be introduced of there were any inadvertent breach of asepsis during filling operations.

    S. No.
    Additives
    Concentration range (%)
    1.       
    Benzalkonium chloride
    0.01
    2.       
    Benzethonium chloride
    0.01
    3.       
    Benzyl alcohol
    0.5-10.0
    4.       
    Butylparaben
    0.015
    5.       
    Chlorobutanol
    0.25-0.5
    6.       
    Metacresol
    0.1-0.25
    7.       
    Methy paraben
    0.01-0.18
    8.       
    Phenol
    0.065-0.5
    9.       
    Phenylmercuric nitrate
    0.001
    10.   
    Propylparaben
    0.005-0.035
    11.   
    Thimerosal
    0.001-0.02

    2. Antioxidants: 

    Many drugs in solution are subject to oxidative degradation. Such reactions are mediated either by free radicals or by molecular oxygen and often involve the addition of oxygen or the removal of hydrogen. Oxidative decomposition is catalyzed by metal, hydrogen, and hydroxyl ions. Drugs possessing a favorable oxidation potential will be especially vulnerable to oxidation. For example, a great number of drugs are formulated in the reduced form (e.g., epinephrine, morphine, ascorbic acid, menadione, etc.) and are easily oxidized. By increasing the oxidation potential of the drug, oxidation can be minimized.
    Salts of sulfur dioxide, including bisulfite, metabisulfite, and sulfite, are the most common antioxidants used in aqueous parenterals. These antioxidants maintain product stability by being preferentially oxidized and gradually consumed over the shelf life of the product.

    S. No.
    Additives
    Concentration range (%)

    Reducing agents

    1.       
    Ascorbic acid
    0.02-0.1
    2.       
    Sodium bisulfite
    0.1-0.15
    3.       
    Sodium metabisulfite
    0.1-0.15
    4.       
    Sodium formaldehyde sulfoxide
    0.1-0.15
    5.       
    Thiourea
    0.005

    Blocking agents

    6.       
    Ascorbic acid esters
    0.01-0.015
    7.       
    Butyl hydroxytoluene (BHT)
    0.005-0.02
    8.       
    Tocopherols
    0.05-0.075

    Synergist agents

    9.       
    Ascorbic acid
    0.01-0.05
    10.   
    Citric acid
    0.005-0.01
    11.   
    Citraconic acid
    0.03-0.45
    12.   
    Phosphoric acid
    0.005-0.01
    13.   
    Tartaric acid
    0.01-0.02

    Chelating agents

    14.   
    Ethylenediaminetetraacetic acid salts
    0.01-0.075

    3. Buffers: 

    Many drugs require a certain pH range to maintain product stability. Drug solubility strongly depends on the pH of the solution. Change in pH may occur during storage by the following ways:-
    a)      by the dissolving of glass constitutes in the product
    b)     by the releasing of constituents from rubber closures or plastic components in contact with the product
    c)      by dissolving of gases and vapors from the airspace in the container
    d)      reactions within the product

    Buffer systems for parenterals consist of either a weak base and the salt of a weak base or a weak base or a weak acid and the salt of weak acid.

    S. No.
    Additives
    Concentration range (%)
    1.       
    Acetic acid
    0.22
    2.       
    Adipic acid
    1.0
    3.       
    Benzoic acid and sodium benzoate
    5.0
    4.       
    Citric acid
    0.5
    5.       
    Lactic acid
    0.1
    6.       
    Maleic acid
    1.6
    7.       
    Potassium phosphate
    0.1
    8.       
    Sodium phosphate mono basic
    1.7
    9.       
    Sodium phosphate dibasic
    0.71
    10.   
    Sodium acetate
    0.8
    11.   
    Sodium bicarbonate
    0.115
    12.   
    Sodium carbonate
    0.06
    13.   
    Sodium citrate
    4.0
    14.   
    Sodium tartrate
    1.2
    15.   
    Tartaric acid
    0.65

    4. Chelating agents: 

    Chelating agents are added to complex and, thereby, inactivate metals, such as copper, iron, and zinc that generally catalyze oxidative degradation of drug molecules. Source of metal contamination include raw material impurities; solvents, such as water, rubber stoppers, and containers; and equipment employed in the manufacturing process.

    S. No.
    Additives
    Concentration range (%)
    1.       
    Edetate disodium
    0.00368-0.05
    2.       
    Edetate calcium disodium
    0.04
    3.       
    Edetate tetrasodium
    0.01

    5. Inert gases: 

    Another means of enhancing the product integrity of oxygen sensitive medicaments is by displacing the air the solution with nitrogen or argon. This technique may be made more effective by first purging with nitrogen or boiling the water to reduce dissolved oxygen. The container is also purged with nitrogen or argon before filling and may also be topped off with gas before sealing.

    6. Solubilizing, Wetting agents: 

    Solubilizing agents are used to increased drug solubility by using non aqueous solvents.
    S. No.
    Additives
    Concentration range (%)
    1.       
    Dimethylacetamide
    0.01
    2.       
    Ethyl alcohol
    0.61-49.0
    3.       
    Ethyl lactate
    0.1
    4.       
    Glycerin
    14.6-25.0
    5.       
    Lecithin
    0.5-2.3
    6.       
    PEG-40 castor oil
    7.0-11.5
    7.       
    Polyethylene glycol 300
    0.01-50.0
    8.       
    Polysorbate 20
    0.01
    9.       
    Polysorbate 40
    0.05
    10.   
    Polysorbate 80
    0.04-4.0
    11.   
    Povidone
    0.2-1.0
    12.   
    Propylene glycol
    0.2-50.0
    13.   
    Sorbitan monopalminate
    0.05

    7. Surfactants: 

    Surfactants are used:
    a)      to dispose a water-insoluble drug as a colloidal dispersion
    b)      for wetting powder
    c)      to prevent crystal growth in a suspension
    d)     to provide acceptable syringability
    e)      for Solubilizing steroids and fat-soluble vitamins.

    S. No.
    Additives
    Concentration range (%)
    1.       
    Polyethylene
    0.1-0.5
    2.       
    Sorbitan monooleate
    0.05-0.25

    8. Bulking substance or Tonicity adjustment agents: 

    Isotonicity is important for parenteral preparations because the possibility that the product may penetrate red blood cells and cause hemolysis is greatly reduced if the solution is isotonic with blood i.e., the cells maintain their “tone”.

    Solution that less osmotic pressure than the blood plasma called hypotonic and solution that more osmotic pressure than the blood plasma called hypertonic. When introduce hypotonic solution, cell may swell and offers burst because of diffusion of water into the cell i.e., hemolysis, if introduce hypertonic solution. The cell may lose water and shrink. In isotonic solution (e.g. 0.9% sodium chloride) the cells maintain their “tone” and the solution is isotonic with human erythrocytes.

    S. No.
    Additives
    Concentration range (%)
    1.       
    Gelatin
    1.6-2.25
    2.       
    Lactose
    0.14-5.0
    3.       
    Mannitol
    0.4-2.5
    4.       
    Dextrose
    3.75-5.0
    5.       
    Sodium chloride
    varies
    6.       
    Sodium sulfate
    1.1
    7.       
    Sorbitol
    2.0

    9. Protectants: 

    Protectants are used
    a)   to protect against loss of activity caused by some stress
    b)   to prevent loss of active ingredients by adsorption to process equipment or to primary packaging materials.
    These protectants are used primarily in protein formulation.

    S. No.
    Additives
    Concentration range (%)
    1.       
    Sucrose
    2-5
    2.       
    Glucose
    2-5
    3.       
    Lactose
    2-5
    4.       
    Maltose
    2-5
    5.       
    Trehalose
    2-5
    6.       
    Human serum albumin
    0.1-1.0

    10. Other added substance:

    S. No.
    Additives
    Concentration range (%)

    Suspending agents

    1.       
    Gelatin
    2.0
    2.       
    Methylcellulose
    0.03-1.05
    3.       
    Pectin
    0.2
    4.       
    Polyethylene glycol 4000
    1.7-3.0
    5.       
    Sodium carboxymethyl cellulose
    0.05-0.75
    6.       
    Sorbitol solution
    50.0

    Stabilizers

    7.       
    Creatinine
    0.5-0.8
    8.       
    Glycine
    1.5-2.25
    9.       
    Niacinamide
    1.25-2.5
    10.   
    Sodium caprylate
    0.4
    11.   
    Sodium saccharin
    0.03


    Submitted By:
    MR. Zubair Khalid Labu1, Md. Abdul Bake*2, Khurshid jahan3
    Address: 1 Head of the Pharmacy Department, World University of Bangladesh, Bangladesh, 
    *2 Product Development Officer, Gonoshasthaya Pharmaceuticals Limited, Dhaka, Bangladesh,
    3 Lecturer, Department of Pharmacy, World University of Bangladesh, Bangladesh.
    Email: Md. Abdul Bake* - abdul.bake@yahoo.com

    No comments:

    Post a Comment

    Please don't spam. Comments having links would not be published.


    Popular Categories

    QA SOPs QC SOPs Micro SOPs HVAC Production SOPs Stores SOPs Checklists Maintenance SOPs HPLC Sterile GLP Validation Protocols Water System GDP Regulatory Maintenance Calibration Warning Letters Education B.Pharmacy
    Online Courses


    Follow Pharmaguideline



    DOCUMENTS

    PHARMACEUTICAL DOCUMENTS




    Editable Pharmaceutical Documents in MS-Word Format. Ready to use SOPs, Protocols, Master Plans, Manuals and more...

    View


    adsbypg


    GET APP FOR NEWS UPDATES


    Android App