SOP for Cleaning of Autoclave

1.0 OBJECTIVE

To lay down the cleaning procedure of autoclave.

2.0 SCOPE

This procedure is applicable for cleaning of Autoclave

3.0 RESPONSIBILITY

3.1 Doing: Lab Asst./Technical Assistant
3.2 Checking: Technical Assistant/Executive

4.0 ACCOUNTABILITY

Head of the Department

5.0 PROCEDURE 

5.1 After the completion of cycle unload the autoclave.
5.2 Then shut the door II of the sterile side.
5.3 Open the non-sterile side door.
5.4 Check the chamber temperature. It should be below 50°.
5.5 Clean the chamber & trays with tap water.
5.6 Keep the chamber drain valve open
5.6 Use brush for cleaning if required.
5.7 Remove the strainer from drain hole and clean and put it back in place.
5.8 Rinse the entire chamber and trays with distilled water.
5.9 Clean the outer surface with a clean cotton cloth.
5.10 Record the cleaning in Annexure I.

6.0 ABBREVIATIONS:

SOP - Standard Operating Procedure

ANNEXURE-I

MICROBIOLOGY DEPARTMENT

CLEANING RECORDS OF AUTOCLAVE

Date	Inner side	Outer side	Cleaned By	Checked by	Remarks & Sign

Get ready to use editable documents in MS-Word FormatView List

Share

Tweet

Share

Share