Silver Nitrate Solution Preparation
- Take about 100 ml of water in a cleaned and dried 1000 ml volumetric flask.
- Add about 17 gm of Silver Nitrate with continues stirring.
- Add more about 700 ml of distilled water, mix.
- Make up the volume 1000 ml with water. Mix solution thoroughly.
- Keep the solution for at least one hour and then carry out the standardization.
Silver Nitrate Solution Standardization
- Transfer about 50 mg, accurately weighed, of reagent-grade sodium chloride, previously dried at 110° for 2 hours, to a 150-ml conical flask.
- Dissolve in 5 ml of distilled water.
- Add 2.5 ml of acetic acid, 25 ml of methanol, and about 0.25 ml of Eosin Y indicator.
- Stir, preferably with a magnetic stirrer.
- Titrate with the silver nitrate solution.
- Calculate the molarity of solution by the following formula:
M = ---------------------------
AgNO3 in ml x 58.44
Is there other way of standardizing Silver Nitrate?
ReplyDeleteWhat is the problem with this method.
DeleteSir this method good but factor limit 0.95 to 1.05 na
ReplyDeleteNice sir good mater
ReplyDeleteSir,
ReplyDeleteWhat quantity of all reagents will required for titration of 0.001M AgNO3 solution ??