This is a list of International Organization for Standardization (ISO) standards.
ISO 1–ISO 999
* ISO 1 Geometrical Product Specifications (GPS) — Standard reference temperature for geometrical product specification and verification
* ISO 2 Textiles — Designation of the direction of twist in yarns and related products
* ISO 3 Preferred numbers — Series of preferred numbers
* ISO 4 Information and documentation — Rules for the abbreviation of title words and titles of publications
* ISO 5 Photography and graphic technology — Density measurements
* ISO 6 Photography — Black-and-white pictorial still camera negative film/process systems — Determination of ISO speed
* ISO 7 Pipe threads where pressure-tight joints are made on the threads
* ISO 8 Documentation — Presentation of periodicals
* ISO 9 Information and documentation — Transliteration of Cyrillic characters into Latin characters — Slavic and non-Slavic languages
* ISO 11 Aircraft — Ground pressure testing connections for pressure cabins
* ISO 12 Aerospace — Pipelines — Identification
* ISO 13 Grey iron pipes, special castings and grey iron parts for pressure main lines [withdrawn 2004-07-19]
* ISO 14 Straight-sided splines for cylindrical shafts with internal centering — Dimensions, tolerances and verification
* ISO 16 Acoustics — Standard tuning frequency (Standard musical pitch)
* ISO 17 Guide to the use of preferred numbers and of series of preferred numbers
* ISO 18 Documentation — Contents list of periodicals
* ISO 31 Quantities and units
* ISO 65 Carbon steel tubes suitable for screwing in accordance with ISO 7-1[2]
* ISO 68-1 ISO general purpose screw threads — Basic profile — Part 1: Metric screw threads[3]
* ISO 68-2 ISO general purpose screw threads — Basic profile — Part 2: Inch screw threads
* ISO 216 paper sizes, e.g. the A4 paper size
* ISO 226 Phon based on Fletcher-Munson curves
o ISO 226:2003 Phon based on newer Equal-loudness contours
* ISO 228-1: Pipe threads where pressure-tight joints are not made on the threads — Part 1: Dimensions, tolerances and designation
* ISO 233:1984 Transliteration of Arabic characters into Roman characters
o ISO 233-2:1993 Transliteration of Arabic characters into Roman characters — Part 2: Arabic language — Simplified transliteration
* ISO 259:1984 Documentation — Transliteration of Hebrew characters into Roman characters
o ISO 259-2:1994 Transliteration of Hebrew characters into Roman characters — Part 2: Simplified transliteration
* ISO 261 General purpose metric screw threads. General plan
* ISO 262 Selected metric-screw-thread sizes for screws, bolts, and nuts
* ISO 361 Basic ionizing radiation symbol
* ISO 500 Agricultural tractors — Rear-mounted power take-off
* ISO 639 Codes for the representation of names of languages
o ISO 639-1 Codes for the representation of names of languages — Part 1: Alpha-2 code
o ISO 639-2 Codes for the representation of names of languages — Part 2: Alpha-3 code
o ISO 639-3 Codes for the representation of names of languages — Part 3: Alpha-3 code for comprehensive coverage of languages
o ISO 639-5 Codes for the representation of names of languages — Part 5: Alpha-3 code for language families and groups
* ISO/IEC 646 internationalized 7 bit ASCII variants
* ISO 657 Hot-rolled steel sections
* ISO 668 Series 1 freight containers — Classification, dimensions and ratings
* ISO 690 bibliographic references
* ISO 704 Terminology work - Principles and methods
* ISO 732 Photography — 120-size and 220-size films — Dimensions
* ISO 764 Horology — Magnetic resistant watches
* ISO 838 Standard for punching filing holes into paper
* ISO 843:1997 Conversion of Greek characters into Roman characters
* ISO 860 Terminology work -- Harmonization of concepts and terms
* ISO 898 Mechanical Properties of Fasteners Made of Carbon Steel and Alloy Steel
o ISO 898-1 Bolts, screws and studs with specified property classes—Coarse thread and fine pitch thread
o ISO 898-2 Nuts with specified proof load values—Coarse thread
o ISO 898-5 Set screws and similar threaded fasteners not under tensile stresses
o ISO 898-6 Nuts with specified proof load values—Fine pitch thread
o ISO 898-7 Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
* ISO 965 General purpose metric screw threads — Tolerances
o ISO 965-1 Principles and basic data
o ISO 965-2 Limits of sizes for general purpose external and internal screw threads
o ISO 965-3 Deviations for constructional screw threads
o ISO 965-4 Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
o ISO 965-5 Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
* ISO 999 Guidelines for the content, organization, and presentation of indexes
ISO 1000–ISO 9999
* ISO 1000 SI units and recommendations for the use of their multiples and of certain other units
* ISO 1004 Magnetic ink character recognition
* ISO 1007 135 film format
* ISO 1028 Information processing - Flowchart symbols
* ISO/IEC 1539 Fortran programming language
* ISO 1629 Establishes a system of terms and nomenclature for polymers
* ISO 1745 Information processing — Basic mode control procedures for data communication systems
* ISO 1750 Pesticides and other agrochemicals — Common names
* ISO 1789 Medical vehicles and their equipment. Road ambulances
* ISO/IEC 2022 Information technology: Character code structure and extension techniques
* ISO 2108 International standard book numbering (ISBN)
* ISO 2145 Numbering of divisions and subdivisions in written documents
* ISO 2162 Technical product documentation -- Springs -- Part 1: Simplified representation
* ISO 2171 Cereals and milled cereal products — Determination of total ash
* ISO 2242 Photography -- Light sources for use in sensitometric exposure -- Simulation of the spectral distribution of photoflood illumination
* ISO 2281 Water-resistant watches
* ISO 2533 Standard Atmosphere
* ISO 2636 Information processing — Conventions for incorporating flowchart symbols in flowcharts
* ISO 2709 Format for information exchange (e.g. MARC)
* ISO 2768 Standard for dimensional tolerance in manufacturing
* ISO 3029 Photography — 126-size cartridges — Dimensions of cartridge, film and backing paper [withdrawn 1999-03-18]
* ISO 3082 Iron ores — Sampling and sample preparation procedures
* ISO 3098 Technical product documentation -- Lettering -- Part 0: General requirements
* ISO 3103 Method of brewing tea for the purpose of sensory tests
* ISO 3166 Codes for the representation of names of countries and their subdivisions
o ISO 3166-1 Part 1: Country codes
o ISO 3166-2 Part 2: Country subdivision code
o ISO 3166-3 Part 3: Code for formerly used names of countries
* ISO 3297 International standard serial number (ISSN)
* ISO 3506 Mechanical properties of corrosion-resistant stainless steel fasteners
* ISO 3536 Road vehicles — Safety glazing materials — Vocabulary
* ISO 3537 Road vehicles — Safety glazing materials — Mechanical tests
* ISO 3538 Road vehicles — Safety glazing materials — Method for the determination of solar transmittance
* ISO 3601 Fluid power systems — O-rings
o ISO 3601-1 Inside diameters, cross-sections, tolerances and size identification code (Recently updated)
o ISO 3601-2 Housing dimensions for general applications (Recently updated)
o ISO 3601-4 Anti-extrusion rings (back-up rings) (Recently updated)
* ISO 3602 Romanization of Japanese
* ISO 3632 Quality of Saffron
* ISO 3635:1981 Size designation of clothes — Definitions and body measurement procedure
* ISO 3864 Safety labels
* ISO 3901 International Standard Recording Code (ISRC)
* ISO 3977 Design and procurement standards for gas turbine system applications
* ISO 4074: Natural latex rubber condoms -- Requirements and test methods
* ISO 4157 Subdivision of construction works
o ISO 4157-1: buildings and part of buildings
o ISO 4157-2: room numbers
o ISO 4157-3: room identifiers
* ISO 4179 Ductile iron pipes and fittings for pressure and non-pressure pipelines — Cement mortar lining
* ISO 4217 Currency codes
* ISO 4628 Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance
o ISO 4628-1 : General introduction and designation system
o ISO 4628-3 : Assessment of degree of rusting
* ISO/IEC 4873:1991 8-bit code for information interchange
* ISO 4892 Plastics -- Methods of exposure to laboratory light sources
* ISO 5127 Information and documentation — Vocabulary
* ISO 5167 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full
o ISO 5167-1 Part 1: General principles and requirements
o ISO 5167-2 Part 2: Orifice plates
o ISO 5167-3 Part 3: Nozzles and Venturi nozzles
o ISO 5167-4 Part 4: Venturi tubes
* ISO 5218 Representation of human sexes
* ISO 5455 Technical drawings: scales
* ISO 5457 Technical product documentation -- Sizes and layout of drawing sheets
* ISO 5775 Bicycle tires and rims
* ISO 5800 Photography — Colour negative films for still photography — Determination of ISO speed
* ISO 5964 Guidelines for the Establishment and Development of Multilingual Thesauri
* ISO 5971:1981 Size designation of clothes — Pantyhose
* ISO 6166 Securities and related financial instruments — International securities identification numbering system (ISIN)
* ISO 6194 Rotary-shaft lip-type seals incorporating elastomeric sealing elements
o ISO 6194-5 Identification of visual imperfections
* ISO 6344 Coated abrasives — Grain size analysis
o ISO 6344-1 Part 1: Grain size distribution test
o ISO 6344-2 Part 2: Determination of grain size distribution of macrogrits P12 to P220
o ISO 6344-3 Part 3: Determination of grain size distribution of microgrits P240 to P2500
* ISO 6336 Calculation of load capacity of spur and helical gears
* ISO 6429 Information technology: Control functions for coded character sets
* ISO 6438 Documentation — African coded character set for bibliographic information interchange
* ISO 6579 Microbiological detection of Salmonella spp in food and animal feeding stuffs
* ISO 6594 Cast iron drainage pipes and fittings — Spigot series
* ISO 6709 Standard representation of latitude, longitude and altitude for geographic point locations
* ISO 6946 Building components and building elements — Thermal resistance and thermal transmittance — Calculation method
* ISO 7001 Graphical symbols — Public information symbols
* ISO 7002 Agricultural food products — Layout for a standard method of sampling from a lot
* ISO 7098 Romanization of Chinese
* ISO 7200 Technical product documentation - Data fields in title blocks and document headers
* ISO 7240 Fire detection and alarm systems
* ISO 7372 Trade data interchange
* ISO/IEC 7501-1:1997 Identification cards — Machine readable travel documents (Part 1: Machine readable passport; Part 2: Machine readable visa; Part 3: Machine readable official travel documents)
* ISO 7736 Car radio installation space
* ISO/IEC 7810 Identification cards — Physical characteristics
* ISO/IEC 7811 Identification cards — Recording technique
* ISO/IEC 7812 Identification cards — Identification of issuers
* ISO/IEC 7813 Information technology — Identification cards — Financial transaction cards
* ISO/IEC 7816 Identification cards — Integrated circuit cards
* ISO/IEC 7942 Graphical Kernel System
* ISO 8000 Data quality
* ISO 8090 Cycles — Terminology
* ISO 8180 Ductile iron pipelines — Polyethylene sleeving for site application
* ISO 8373 Manipulating industrial robots — Vocabulary
* ISO 8402 Quality Management and Quality Assurance — Vocabulary
* ISO 8501-1 Preparation of steel substrates before application of paints and related products
* ISO 8554 Hardware for furniture — Terms for furniture locks [withdrawn, 1999-11-11]
* ISO 8555 Hardware for furniture — Terms for furniture fittings
* ISO 8559:1989 Garment construction and anthropometric surveys — Body dimensions
* ISO 8583 Financial transaction card originated messages — Interchange message specifications
o ISO 8583-1 Part 1: Messages, data elements and code values
o ISO 8583-2 Part 2: Application and registration procedures for Institution Identification Codes (IIC)
o ISO 8583-3 Part 3: Maintenance procedures for messages, data elements and code values
* ISO 8601 Data elements and interchange formats — Information interchange — Representation of dates and times
* ISO/IEC 8613 Open Document Architecture
* ISO/IEC 8632 Computer Graphics Metafile
* ISO 8651 Graphical Kernel System language bindings
* ISO/IEC 8652: Information technology — Programming languages — Ada
* ISO 8653:1986 Jewellery — Ring-sizes — Definition, measurement and designation
* ISO 8691 Petroleum products — Low levels of vanadium in liquid fuels — Determination by flameless atomic absorption spectrometry after ashing
* ISO 8805 Graphical Kernel System for Three Dimensions and the C language bindings are ISO 8806
* ISO 8806-4 Graphical Kernel System for Three Dimensions, C language bindings
* ISO 8807: Language Of Temporal Ordering Specification (LOTOS)
* ISO/IEC 8824 Abstract Syntax Notation One (ASN.1)
* ISO/IEC 8825 ASN.1 Encoding Rules
* ISO 8859 8-bit coded character sets
o ISO 8859-1 Latin-1
o ISO 8859-2 Latin-2
o ISO 8859-3 Latin-3 or "South European"
o ISO 8859-4 Latin-4 or "North European"
o ISO 8859-5 Cyrillic
o ISO 8859-6 Arabic
o ISO 8859-7 Greek
o ISO 8859-8 Hebrew
o ISO 8859-9 Latin-5
o ISO 8859-10 Latin-6, rearrangement of 8859-4
o ISO 8859-11 Thai
o ISO 8859-13 Latin-7 or "Baltic Rim"
o ISO 8859-14 Latin-8 or "Celtic"
o ISO 8859-15 Latin-9, revision of 8859-1
o ISO 8859-16 Latin-10 South-Eastern European languages and others
* ISO 8879 Standard Generalized Markup Language (SGML)
* ISO 9000 Quality management system in production environments
* ISO 9001 Quality management
* ISO 9069 SGML support facilities — SGML Document Interchange Format (SDIF)
* ISO/IEC 9075 SQL
* ISO/IEC 9126 Software engineering — Product quality
* ISO 9141 Network interconnection of computers in a vehicle
o ISO 9141-2 OBD-II standard, aka 9141 CARB standard
* ISO 9241 Ergonomic requirements for office work with visual display terminals
* ISO 9362 Bank Identifier Code or BIC system
* ISO 9407 Shoe sizes — Mondopoint system of sizing and marking
* ISO/IEC 9541 Information technology — Font information interchange
o ISO/IEC 9541-1:1991 Information technology — Font information interchange — Part 1: Architecture
o ISO/IEC 9541-2:1991 Information technology — Font information interchange — Part 2: Interchange Format
o ISO/IEC 9541-3:1994 Information technology — Font information interchange — Part 3: Glyph shape representation
* ISO 9564 Banking — Personal Identification Number management and security
* ISO/IEC 9579 Remote database access for SQL
* ISO 9592, ISO 9593 PHIGS (Programmer's Hierarchical Interactive Graphics System)
* ISO/IEC 9594 Information technology — Open Systems Interconnection — The Directory
* ISO 9660 Information processing — Volume and file structure of CD-ROM for information interchange
* ISO/IEC 9796 Information technology — Security techniques — Digital signature schemes giving message recovery
* ISO/IEC 9797 Information technology — Security techniques — Message Authentication Codes (MACs)
* ISO/IEC 9798 Information technology — Security techniques — Entity authentication
* ISO/IEC 9834 Information technology — Open Systems Interconnection — Procedures for the operation of OSI Registration Authorities
* ISO 9869 Thermal insulation — Building elements — In-situ measurements of thermal resistance and thermal transmittance
* ISO 9899 C programming language
* ISO/IEC 9945 Portable Operating System Interface (POSIX)
* ISO 9984 Conversion of Georgian characters into Roman characters
* ISO 9985 Conversion of Armenian characters into Roman characters
* ISO 9992:1999 Financial transaction cards — Security architecture of financial transaction systems using integrated circuit cards
* ISO/IEC 9995 Information technology — Keyboard layouts for text and office systems
* ISO 9999 Technical aids for persons with disabilities. Classification and terminology
* ISO 10006 Quality management — Guidelines to quality in project management
* ISO 10007 Quality management — Guidelines for configuration management
* ISO 10012 Measurement management systems — Requirements for measurement processes and measuring equipment
* ISO/IEC 10021 Message Oriented Text Interchange Systems (MOTIS)
* ISO/IEC 10026 Open Systems Interconnection
* ISO 10077 Thermal performance of windows, doors and shutters — Calculation of thermal transmittance
* ISO/IEC 10089 Information technology; 130 mm rewritable optical disk cartridge for information interchange — 650 MB per cartridge
* ISO 10160 Information and documentation — Open Systems Interconnection — Interlibrary Loan Application Service Definition
* ISO 10161 Information and documentation — Open Systems Interconnection — Interlibrary Loan Application Protocol Specification
* ISO/IEC 10164 Information technology — Open Systems Interconnection — Systems Management
* ISO/IEC 10179:1996 Document Style Semantics and Specification Language (DSSSL)
* ISO 10202:1991 Financial transaction cards — Security architecture of financial transaction systems using integrated circuit cards
* ISO 10206 Extended Pascal (programming language)
* ISO 10211 Thermal bridges in building construction — Heat flows and surface temperatures — Detailed calculations
* ISO 10279 BASIC programming language
* ISO 10303 Industrial automation systems and integration — Product data representation and exchange. Known as STEP, Standard for the Exchange of Product data
* ISO 10383 Securities and related financial instruments — Codes for exchanges and market identification (MIC)
* ISO 10487 Connections for passenger car stereos
* ISO 10628 Flow diagrams for process plants
* ISO 10646 Universal Character Set (equivalent to Unicode's character set)
* ISO 10664 Hexalobular internal driving feature for bolts and screws — Torx screw head
* ISO 10957 Information and documentation — International Standard Music Number (ISMN)
* ISO 10962 Securities and related financial instruments — Classification of Financial Instruments (CFI code)
* ISO 10993 Biological evaluation of medical devices
o ISO 10993-1 Evaluation and testing within a risk management process
o ISO 10993-2 Animal welfare requirements
o ISO 10993-3 Tests for genotoxicity, carcinogenicity and reproductive toxicity
o ISO 10993-4 Selection of tests for interactions with blood
o ISO 10993-5 Tests for in vitro cytotoxicity
o ISO 10993-6 Tests for local effects after implantation
o ISO 10993-7 Ethylene oxide sterilization residuals
o ISO 10993-8 Selection and qualification of reference materials for biological tests [withdrawn 2003-12-15]
o ISO 10993-9 Framework for identification and quantification of potential degradation products
o ISO 10993-10 Tests for irritation and skin sensitization
o ISO 10993-11 Tests for systemic toxicity
o ISO 10993-12 Sample preparation and reference materials
o ISO 10993-13 Identification and quantification of degradation products from polymeric medical devices
o ISO 10993-14 Identification and quantification of degradation products from ceramics
o ISO 10993-15 Identification and quantification of degradation products from metals and alloys
o ISO 10993-16 Toxicokinetic study design for degradation products and leachables
o ISO 10993-17 Establishment of allowable limits for leachable substances
o ISO 10993-18 Chemical characterization of materials
o ISO 10993-19 Physico-chemical, morphological and topographical characterization of materials
o ISO 10993-20 Principles and methods for immunotoxicology testing of medical devices
* ISO 11064 Ergonomic design of control centres
o ISO 11064-1:2000 Part 1: Principles for the design of control centres
o ISO 11064-2:2000 Part 2: Principles for the arrangement of control suites
o ISO 11064-3:1999 Part 3: Control room layout ISO 11064-3:1999/Cor 1:2002
o ISO 11064-4:2004 Part 4: Layout and dimensions of workstations
o ISO 11064-5:2008 Part 5: Displays and controls
o ISO 11064-6:2005 Part 6: Environmental requirements for control centres
o ISO 11064-7:2006 Part 7: Principles for the evaluation of control centres
* ISO/IEC 11172 MPEG-1
* ISO 11170:2003 Hydraulic fluid power — Filter elements — Sequence of tests for verifying performance characteristics
* ISO/IEC 11179 Information Technology — Metadata Registries (MDR)
o ISO/IEC 11179-1:2004 Part 1: Framework
o ISO/IEC 11179-2:2005 Part 2: Classification
o ISO/IEC 11179-3:2003 Part 3: Registry metamodel and basic attributes
o ISO/IEC 11179-4:2004 Part 4: Formulation of data definitions
o ISO/IEC 11179-5:2005 Part 5: Naming and identification principles
o ISO/IEC 11179-6:2005 Part 6: Registration
* ISO 11180 Postal addressing [Withdrawn, 2004-01-15]
* ISO/IEC 11404:1996 Language-independent datatypes (See also General purpose datatypes)
* ISO 11446:2004 Connectors for the electrical connection of towing and towed vehicles — 13-pole connectors for vehicles with 12 V nominal supply voltage
* ISO 11469:2000 Plastics — Generic identification and marking of plastics products
* ISO 11521 Replaced by ISO 15022
* ISO/IEC 11578:1996 Information technology — Open Systems Interconnection — Remote procedure call (RPC)
* ISO 11783 aka. IsoBus — J1939-based communication protocol for the agriculture industry
* ISO/IEC 11801 Information technology — Generic cabling for customer premises
* ISO 11898 Road vehicles — Controller area network (CAN)
* ISO 12006 Building construction. Organization of information about construction works
* ISO 12207 Software lifecycle processes
* ISO 12639 Graphic technology — Prepress digital data exchange — Tag image file format for image technology (TIFF/IT)
* ISO 12641 Graphic technology — Prepress digital data exchange — Colour targets for input scanner calibration
* ISO 13239 High-level data link control (HDLC) procedures
* ISO/IEC 13249 SQL multimedia and application packages
* ISO/IEC 13250 Topic map
* ISO 13346 Volume and file structure of write-once and rewritable media, on which UDF is based
* ISO 13370 Thermal performance of buildings — Heat transfer via the ground — Calculation methods
* ISO 13406 Ergonomic requirements for work with visual displays based on flat panels
o ISO 13406-1:1999 Part 1: Introduction
o ISO 13406-2:1002 Part 2: Ergonomic requirements for flat panel displays
* ISO 13407:1999 Human-centred design processes for interactive systems
* ISO 13450 110 film format
* ISO 13485:2003 Medical Devices — Quality management systems — Requirements for regulatory purposes
* ISO 13490 Information technology: Volume and file structure of read-only and write-once compact disk media for information interchange
* ISO 13567/1 to 3 Technical product documentation; Organization and naming of layers for Computer-aided design (CAD)
* ISO/IEC 13568:2002 Information Technology — Z Formal Specification Notation — Syntax, Type System and Semantics
* ISO 13616 Financial services — International bank account number (IBAN)
* ISO 13628 - Design And Operation Of Subsea Production Systems
o ISO 13628-1 - Part 1: General Requirements And Recommendations
o ISO 13628-2 - Part 2: Unbonded Flexible Pipe Systems For Subsea And Marine
o ISO 13628-3 - Part 3: Through flowline (TFL) systems
o ISO 13628-4 - Part 4: Subsea wellhead and tree equipment
o ISO 13628-5 - Part 5: Subsea Umbilicals
o ISO 13628-6 - Part 6: Subsea Production Control Systems
o ISO 13628-7 - Part 7: Completion/workover Riser Systems
o ISO 13628-8 - Part 8: Remotely Operated Vehicle (rov) Interfaces On Subsea
o ISO 13628-9 - Part 9: Remotely Operated Tool (rot) Intervention Systems
o ISO 13628-10 - Part 10: Specification For Bonded Flexible Pipe
o ISO 13628-11 - Part 11: Flexible Pipe Systems for Subsea and Marine Applications
* ISO 13849-1 Safety of machinery, Safety related parts of control systems, General principles for design
* ISO/IEC 13818 MPEG-2
* ISO 13837 Road vehicles — Safety glazing materials — Method for the determination of solar transmittance
* ISO 14000 Environmental Management Standards in production environments
* ISO 14001 Environmental Management
* ISO 14064 Greenhouse Gases
* ISO 14223 Radiofrequency [sic] identification of animals — Advanced transponders
* ISO 14230 Road vehicles — Diagnostic systems — Keyword Protocol 2000
o ISO 14230-1 Physical layer
o ISO 14230-2 Data link layer
o ISO 14230-3 Application layer
o ISO 14230-4 Requirements for emission-related systems
* ISO/IEC 14443 Identification cards — Contactless integrated circuit(s) cards — Proximity cards
* ISO/IEC 14496 MPEG-4
* ISO 14644 Standards Cleanrooms and associated controlled environments
o ISO 14644-1:1999 Classification of Air Cleanliness
o ISO 14644-2:2000 Testing and Monitoring to prove Compliance
o ISO 14644-3:2005 Metrology & Test Methods
o ISO 14644-4:2001 Design, Construction and Start-up
o ISO 14644-5:2004 Operations
o ISO 14644-6:2007 Vocabulary
o ISO 14644-7:2004 Separative Devices
o ISO 14644-8:2006 Classification of Airborne Molecular Contamination
o ISO 14644-9 Clean Surfaces
* ISO 14651 Information technology: International string ordering and comparison
* ISO 14698 Standards
o ISO-14698-1 Bio-contamination Control — General Principles
o ISO-14698-2 Evaluation & Interpretation of Bio-contamination Data
* ISO 14750 Information technology — Open Distributed Processing — Interface Definition Language
* ISO/IEC 14755 Input methods to enter unicode characters from ISO/IEC 10646
* ISO 14855-1:2005 Aerobic Biodegradation under controlled composting conditions
* ISO 14855-2:2007 Aerobic Biodegradation under controlled composting conditions with gravimetric measurement of carbon dioxid
* ISO/IEC 14882 Programming Languages — C++
* ISO 14915 Software ergonomics for multimedia user interfaces
o ISO 14915-1:2002 Part 1: Design principles and framework
o ISO 14915-2:2003 Part 2: Multimedia navigation and control
o ISO 14915-3:2002 Part 3: Media selection and combination
* ISO 14971:2007 Medical Devices — Application Of Risk Management To Medical Devices
* ISO/IEC 14977 Extended Backus-Naur Form (EBNF)
* ISO 15000 Electronic business eXtensible Markup Language ebXML
o ISO 15000-1:2004 Part 1: Collaboration-protocol profile and agreement specification (ebCPP)
o ISO 15000-2:2004 Part 2: Message service specification (ebMS)
o ISO 15000-3:2004 Part 3: Registry information model specification (ebRIM)
o ISO 15000-4:2004 Part 4: Registry services specification (ebRS)
o ISO 15000-5:2005 Part 5: ebXML Core Components Technical Specification, Version 2.01(ebCCTS)
* ISO 15022 Securities: Scheme for messages(Data Field Dictionary)
* ISO 15082 Road vehicles — Tests for rigid plastic safety glazing materials
* ISO 15099 Thermal performance of windows, doors and shading devices — Detailed calculations
* ISO 15112 Natural gas — Energy determination
* ISO 15189 Medical laboratories — Particular requirements for quality and competence
* ISO 15288 Systems engineering — System life cycle processes
* ISO 15289 Systems and software engineering — Content of systems and software life cycle process information products (Documentation)
* ISO/IEC 15291: Information technology — Programming languages — Ada Semantic Interface Specification (ASIS)
* ISO 15403 Natural gas — Natural gas for use as a compressed fuel for vehicles
o ISO 15403-1 Designation of the quality
* ISO/IEC 15408 Common Criteria — Evaluation Criteria for Information Technology Security
* ISO/IEC 15434 Information technology — Automatic Identification and Data Capture Techniques - Syntax for High-Capacity ADC Media. For example: Data Matrix 2D barcode
* ISO/IEC 15444 JPEG 2000
* ISO/IEC 15445:2000 ISO HTML, a subset of Hypertext Markup Language (HTML) 4
* ISO/IEC 15504 Framework for the assessment of software processes, also known as SPICE (Software Process Improvement and Capability Determination)
* ISO 15614-13:2002 Specification and qualification of welding procedures for metallic materials-Welding procedure test
* ISO 15686 Service life planning for constructive works in 10 parts
* ISO/IEC 15693 Identification cards — Contactless integrated circuit(s) cards — Vicinity cards
* ISO 15706 International Standard Audiovisual Number
* ISO 15707 International Standard Musical Work Code
* ISO 15836 The Dublin Core metadata element set
* ISO 15897 Standard for the registration of new POSIX locales and POSIX charmaps
* ISO 15924 Codes for the representation of names of scripts
* ISO 15930 Graphic technology — Prepress digital data exchange using PDF
* ISO/IEC 15948:2003 Portable Network Graphics (PNG)
* ISO 15970 Natural gas — Measurement of properties — Volumetric properties: density, pressure, temperature and compression factor
* ISO 15971 Natural gas. Measurement of properties. Calorific value and Wobbe index
* ISO/IEC 16500 Generic Digital Audio-Visual Systems DAVIC
* ISO 16071:2003 Ergonomics of human-system interaction, Guidance on accessibility for human-computer interfaces
* ISO 16134 Earthquake- and subsidence-resistant design of ductile iron pipelines
* ISO 16232 Road vehicles — Cleanliness of components of fluid circuits
o ISO 16232-8 Particle nature determination by microscopic analysis
o ISO 16232-9 Particle sizing and counting by automatic light extinction particle counter
o ISO 16232-10 Expression of results
* ISO/IEC 16262 ECMAScript
* ISO 16549 Textiles — Unevenness of textile strands — Capacitance method
* ISO 16750 Road vehicles — Environmental conditions and testing for electrical and electronics equipment
* ISO/TS 16949 Quality management systems — Particular requirements for the application of ISO 9001:2000 for automotive production and relevant service part organizations
* ISO 16982:2002 Ergonomics of human-system interaction, Usability methods supporting human-centred design
* ISO/IEC 17020:1998 General criteria for the operation of various types of bodies performing inspection
* ISO/IEC 17024:2003 specifies requirements for a body certifying persons against specific requirements, including the development and maintenance of a certification scheme for personnel
* ISO/IEC 17025 General requirements for competence of test and calibration laboratories
* ISO 17202 Textiles — Determination of twist in single spun yarns — Untwist/retwist method
* ISO 17776 : Petroleum industries
* ISO/IEC 17799 Information technology: Code of practice for information security management
* ISO/IEC 17894 Ships and marine technology — Computer applications — General principles for development and use of PES in marine applications
* ISO/IEC 18000 Information Technology AIDC Techniques-RFID (Radio Frequency Identification) for Item Management — Air Interface
o 18000-1 Part 1 — Generic Parameters for the Air Interface for Globally Accepted Frequencies
o 18000-2 Part 2 — Parameters for Air Interface Communications below 135 kHz
o 18000-3 Part 3 — Parameters for Air Interface Communications at 13.56 MHz
o 18000-4 Part 4 — Parameters for Air Interface Communications at 2.45 GHz
o 18000-5 Part 5 — Parameters for Air Interface Communications at 5.8 GHz (Withdrawn)
o 18000-6 Part 6 — Parameters for Air Interface Communications at 860 to 960 MHz
o 18000-7 Part 7 — Parameters for Air Interface Communications at 433 MHz
* ISO/IEC 18004: QR Code Standardization
* ISO/IEC 18009: Information technology — Programming languages — Ada: Conformity assessment of a language processor (ACATS)
* ISO/IEC 18013 Information technology — Personal Identification — ISO-compliant driving license
o ISO/IEC 18013-1:2005(E) Part 1: Physical characteristics and basic data set
o ISO/IEC 18013-2:2008(E) Part 2: Machine-readable technologies
o ISO/IEC 18013-3:2009(E) Part 3: Access control, authentication and integrity validation
* ISO/IEC 18014 Information technology — Security techniques — Time-stamping services
* ISO/IEC 18023:2006(E) Information technology — SEDRIS —
o ISO/IEC 18023-1:2006(E) Information technology — SEDRIS — Part 1: Functional specification
o ISO/IEC 18023-2:2006(E) Information technology — SEDRIS — Part 2: Abstract transmittal format
o ISO/IEC 18023-3:2006(E) Information technology — SEDRIS — Part 3: Transmittal format binary encoding
* ISO/IEC 18024-4:2006(E) Information technology — SEDRIS language bindings — Part 4: C
* ISO/IEC 18025:2005(E) Information technology — Environmental Data Coding Specification (EDCS)
* ISO/IEC 18026:2006(E) Information technology — Spatial Reference Model (SRM)
* ISO/IEC 18033 Information technology — Security techniques — Encryption algorithms
o Part 1: General
o Part 2: Asymmetric ciphers
o Part 3: Block ciphers
o Part 4: Stream ciphers
* ISO/IEC 18041-4:2005(E) Information technology — EDCS language bindings — Part 4: C
* ISO/IEC 18042-4:2006(E) Information technology — Spatial Reference Model (SRM) language bindings — Part 4: C
* ISO/IEC 18092 Information technology — Telecommunications and information exchange between systems — Near Field Communication — Interface and Protocol (NFCIP-1)
* ISO 18152:2003 Ergonomics of human-system interaction, Specification for the process assessment of human-system issues
* ISO 18185: Wireless standard for electronic seals using active RFID (Radio Frequency Identification)
* ISO 18245 standard concerning the assignment of Merchant Category Codes (MCC) in retail financial services
* ISO 18529:2000 Ergonomics of human-system interaction, Human-centred lifecycle process descriptions (available in English only)
* ISO 18629 standardized Process Specification Language (PSL)
* ISO 19005 Document management — Electronic document file format for long-term preservation
* ISO 19011 standard providing guidelines for quality and environmental management systems auditing
* ISO 19092-1 Financial Services — Security — Part 1: Security framework
* ISO 19092-2 Financial Services — Security — Part 2: Message syntax and cryptographic requirements
* ISO 19101 Geographic Information: Reference model
* ISO 19105 Geographic Information: Conformance and testing
* ISO 19107 Geographic Information: Spatial schema
* ISO 19108 Geographic Information: Temporal schema
* ISO 19109 Geographic Information: Rules for Application Schema
* ISO 19110 Geographic Information: Feature cataloguing methodology
* ISO 19111 Geographic Information: Spatial referencing by coordinates
* ISO 19111 Geographic Information: Spatial referencing by identifier
* ISO 19113 Geographic Information: Quality principles
* ISO 19114 Geographic Information: Quality evaluation procedures
* ISO 19115 Geographic Information: Metadata
* ISO 19123 Geographic Information: Coverage schema
* ISO 19128 Geographic Information: Web Map Service
* ISO 19131 Geographic Information: Data product specification
* ISO 19136 Geographic Information: Geography Markup Language
* ISO 19439 Framework for enterprise modelling
* ISO 19440 Constructs for enterprise modelling
* ISO/IEC 19501 Unified Modeling Language (UML)
* ISO/IEC 19502 Meta-Object Facility (MOF)
* ISO/IEC 19503 XML Metadata Interchange (XMI)
* ISO/IEC 19757 Document Schema Definition Languages (DSDL)
o ISO/IEC FDIC 19757-2 Regular-grammar-based validation RELAX NG
o ISO/IEC 19757-3 Rule-based validation — Schematron
o ISO/IEC 19757-4 Namespace-based Validation Dispatching Language (NVDL)
* ISO/IEC 19770 Information technology — Software asset management
* ISO/IEC 19785 Common Biometric Exchange Formats Framework (CBEFF 2.0)
* ISO/IEC 19790 Security requirements for cryptographic modules (see also FIPS 140)
* ISO/IEC 19794 Information technology — Biometric data interchange formats
o ISO/IEC 19794-1:2006 Part 1: Framework
o ISO/IEC 19794-2:2005 Part 2: Finger minutiae data
o ISO/IEC 19794-3:2006 Part 3: Finger pattern spectral data
o ISO/IEC 19794-4:2005 Part 4: Finger image data
o ISO/IEC 19794-5:2005 Part 5: Face image data
o ISO/IEC 19794-6:2005 Part 6: Iris image data
o ISO/IEC 19794-7:2007 Part 7: Signature/sign time series data
o ISO/IEC 19794-8:2006 Part 8: Finger pattern skeletal data
o ISO/IEC 19794-9:2007 Part 9: Vascular image data
o ISO/IEC 19794-10:2007 Part 10: Hand geometry silhouette data
* ISO/IEC 20000:2005 IT Service Management System (based on BS15000)
* ISO 20022 Financial Services — universal financial industry message scheme
* ISO/IEC TR 20943 Information technology — Procedures for achieving metadata registry content consistency
o ISO/IEC TR 20943-1:2003 Part 1: Data elements
o ISO/IEC TR 20943-3:2004 Part 3: Value domains
* ISO/IEC 21000 Information technology -- Multimedia framework (MPEG-21)
* ISO/IEC 21481 Information technology — Telecommunications and information exchange between systems — Near Field Communication Interface and Protocol -2 (NFCIP-2)
* ISO 21482 Ionizing-radiation warning -- Supplementary symbol
* ISO 22000 Food safety management systems — Requirements for any organization in the food chain
o ISO/TS 22003 Food safety management systems — Requirements for bodies providing audit and certification of food safety management systems
* ISO 22093 Industrial automation systems and integration -- Physical device control -- Dimensional Measuring Interface Standard (DMIS)
* ISO 22241 : Diesel engines — NOx reduction agent AUS 32
o ISO 22241-1 : Quality requirements
o ISO 22241-2 : Test methods
o ISO 22241-3 : Handling, transportation and storing
* ISO/IEC TR 22250 Regular Language description for XML — (RELAX)
o ISO/IEC TR 22250-1:2002 RELAX Core
* ISO/PAS 22399:2007 Social security — Guideline for incident preparedness and operational continuity management
* ISO 22716:2007: Cosmetics — Good Manufacturing Practices (GMP) — Guidelines on Good Manufacturing Practices
* ISO/IEC 23003-1 : MPEG Surround (aka MPEG-D)
* ISO/IEC 23270:2003 C# programming language
* ISO/IEC 23360 Linux Standard Base (LSB) core specification 3.1 (in publication as of 2005-12)
o ISO/IEC 23360-1 — Part 1: Generic specification
o ISO/IEC 23360-2 — Part 2: Specification for IA32 architecture
o ISO/IEC 23360-3 — Part 3: Specification for IA64 architecture
o ISO/IEC 23360-4 — Part 4: Specification for AMD64 architecture
o ISO/IEC 23360-5 — Part 5: Specification for PPC32 architecture
o ISO/IEC 23360-6 — Part 6: Specification for PPC64 architecture
o ISO/IEC 23360-7 — Part 7: Specification for S390 architecture
o ISO/IEC 23360-8 — Part 8: Specification for S390X architecture
* ISO 23733 Textiles — Chenille yarns — Test method for the determination of linear density
* ISO 23950 Library standard ANSI/NISO Z39.50 — Protocol for searching and retrieving information, usually from bibliographic records
* ISO/IEC 24707:2007 Information technology — Common Logic (CL): a framework for a family of logic-based languages
* ISO/IEC 24727 Identification cards — Integrated circuit card programming interfaces
o ISO/IEC 24727-1 — Part 1: Architecture
o ISO/IEC 24727-2 — Part 2: Generic card interface
o ISO/IEC 24727-3 — Part 3: Application interface
o ISO/IEC 24727-4 — Part 4: Application programming interface (API) administration
o ISO/IEC CD 24727-5 — Part 5: Testing
o ISO/IEC FCD 24727-6 — Part 6: Registration authority procedures for the authentication protocols for interoperability
* ISO/IEC 24744:2007 Software Engineering — Metamodel for Development Methodologies
* ISO/IEC 24762:2008 Information technology — Security techniques — Guidelines for information and communications technology disaster recovery services
* ISO/IEC DIS 25961 Recommended Practice for Architectural Description of Software-Intensive Systems. See IEEE 1471
* ISO 26000 Guidance on social responsibility
* ISO/IEC 26300 OpenDocument Format (ODF)
* ISO/IEC 27000-series Information security management system family of standards
o ISO/IEC 27000 Information security management systems — Overview and vocabulary
o ISO/IEC 27001 Information security management systems — Requirements
o ISO/IEC 27002 Code of practice for information security management
o ISO/IEC 27003 Information security management system implementation guidance
o ISO/IEC 27004 Information security management — Measurement
o ISO/IEC 27005 Information security risk management
o ISO/IEC 27006 Requirements for bodies providing audit and certification of information security management systems
o ISO/IEC 27007 Guidelines for information security management systems auditing
o ISO/IEC 27011 Information security management guidelines for telecommunications organizations based on ISO/IEC 27002
* ISO/PAS 28000 - Specification for security management systems for the supply chain
o ISO/PAS 28004 - Guidelines for the implementation of ISO/PAS 28000
* ISO/IEC 29119 Software Testing[4]
o ISO/IEC 29119-1 — Part 1: Concepts & Vocabulary
o ISO/IEC 29119-2 — Part 2: Test Process
o ISO/IEC 29119-3 — Part 3: Test Documentation
o ISO/IEC 29119-4 — Part 4: Test Techniques
* ISO/IEC 29500 Office Open XML
o ISO/IEC 29500-1 — Part 1: Fundamentals and Markup Language Reference
o ISO/IEC 29500-2 — Part 2: Open Packaging Conventions
o ISO/IEC 29500-3 — Part 3: Markup Compatibility and Extensibility
o ISO/IEC 29500-4 — Part 4: Transitional Migration Features
ISO 30000–ISO 39999
* ISO 31000 Risk management
* ISO 32000 Document management — Portable document format
* ISO/IEC 38500 Corporate governance of information technology
ISO 80000
* ISO/IEC 80000 Quantities and units
ISO 1–ISO 999
* ISO 1 Geometrical Product Specifications (GPS) — Standard reference temperature for geometrical product specification and verification
* ISO 2 Textiles — Designation of the direction of twist in yarns and related products
* ISO 3 Preferred numbers — Series of preferred numbers
* ISO 4 Information and documentation — Rules for the abbreviation of title words and titles of publications
* ISO 5 Photography and graphic technology — Density measurements
* ISO 6 Photography — Black-and-white pictorial still camera negative film/process systems — Determination of ISO speed
* ISO 7 Pipe threads where pressure-tight joints are made on the threads
* ISO 8 Documentation — Presentation of periodicals
* ISO 9 Information and documentation — Transliteration of Cyrillic characters into Latin characters — Slavic and non-Slavic languages
* ISO 11 Aircraft — Ground pressure testing connections for pressure cabins
* ISO 12 Aerospace — Pipelines — Identification
* ISO 13 Grey iron pipes, special castings and grey iron parts for pressure main lines [withdrawn 2004-07-19]
* ISO 14 Straight-sided splines for cylindrical shafts with internal centering — Dimensions, tolerances and verification
* ISO 16 Acoustics — Standard tuning frequency (Standard musical pitch)
* ISO 17 Guide to the use of preferred numbers and of series of preferred numbers
* ISO 18 Documentation — Contents list of periodicals
* ISO 31 Quantities and units
* ISO 65 Carbon steel tubes suitable for screwing in accordance with ISO 7-1[2]
* ISO 68-1 ISO general purpose screw threads — Basic profile — Part 1: Metric screw threads[3]
* ISO 68-2 ISO general purpose screw threads — Basic profile — Part 2: Inch screw threads
* ISO 216 paper sizes, e.g. the A4 paper size
* ISO 226 Phon based on Fletcher-Munson curves
o ISO 226:2003 Phon based on newer Equal-loudness contours
* ISO 228-1: Pipe threads where pressure-tight joints are not made on the threads — Part 1: Dimensions, tolerances and designation
* ISO 233:1984 Transliteration of Arabic characters into Roman characters
o ISO 233-2:1993 Transliteration of Arabic characters into Roman characters — Part 2: Arabic language — Simplified transliteration
* ISO 259:1984 Documentation — Transliteration of Hebrew characters into Roman characters
o ISO 259-2:1994 Transliteration of Hebrew characters into Roman characters — Part 2: Simplified transliteration
* ISO 261 General purpose metric screw threads. General plan
* ISO 262 Selected metric-screw-thread sizes for screws, bolts, and nuts
* ISO 361 Basic ionizing radiation symbol
* ISO 500 Agricultural tractors — Rear-mounted power take-off
* ISO 639 Codes for the representation of names of languages
o ISO 639-1 Codes for the representation of names of languages — Part 1: Alpha-2 code
o ISO 639-2 Codes for the representation of names of languages — Part 2: Alpha-3 code
o ISO 639-3 Codes for the representation of names of languages — Part 3: Alpha-3 code for comprehensive coverage of languages
o ISO 639-5 Codes for the representation of names of languages — Part 5: Alpha-3 code for language families and groups
* ISO/IEC 646 internationalized 7 bit ASCII variants
* ISO 657 Hot-rolled steel sections
* ISO 668 Series 1 freight containers — Classification, dimensions and ratings
* ISO 690 bibliographic references
* ISO 704 Terminology work - Principles and methods
* ISO 732 Photography — 120-size and 220-size films — Dimensions
* ISO 764 Horology — Magnetic resistant watches
* ISO 838 Standard for punching filing holes into paper
* ISO 843:1997 Conversion of Greek characters into Roman characters
* ISO 860 Terminology work -- Harmonization of concepts and terms
* ISO 898 Mechanical Properties of Fasteners Made of Carbon Steel and Alloy Steel
o ISO 898-1 Bolts, screws and studs with specified property classes—Coarse thread and fine pitch thread
o ISO 898-2 Nuts with specified proof load values—Coarse thread
o ISO 898-5 Set screws and similar threaded fasteners not under tensile stresses
o ISO 898-6 Nuts with specified proof load values—Fine pitch thread
o ISO 898-7 Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
* ISO 965 General purpose metric screw threads — Tolerances
o ISO 965-1 Principles and basic data
o ISO 965-2 Limits of sizes for general purpose external and internal screw threads
o ISO 965-3 Deviations for constructional screw threads
o ISO 965-4 Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
o ISO 965-5 Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
* ISO 999 Guidelines for the content, organization, and presentation of indexes
ISO 1000–ISO 9999
* ISO 1000 SI units and recommendations for the use of their multiples and of certain other units
* ISO 1004 Magnetic ink character recognition
* ISO 1007 135 film format
* ISO 1028 Information processing - Flowchart symbols
* ISO/IEC 1539 Fortran programming language
* ISO 1629 Establishes a system of terms and nomenclature for polymers
* ISO 1745 Information processing — Basic mode control procedures for data communication systems
* ISO 1750 Pesticides and other agrochemicals — Common names
* ISO 1789 Medical vehicles and their equipment. Road ambulances
* ISO/IEC 2022 Information technology: Character code structure and extension techniques
* ISO 2108 International standard book numbering (ISBN)
* ISO 2145 Numbering of divisions and subdivisions in written documents
* ISO 2162 Technical product documentation -- Springs -- Part 1: Simplified representation
* ISO 2171 Cereals and milled cereal products — Determination of total ash
* ISO 2242 Photography -- Light sources for use in sensitometric exposure -- Simulation of the spectral distribution of photoflood illumination
* ISO 2281 Water-resistant watches
* ISO 2533 Standard Atmosphere
* ISO 2636 Information processing — Conventions for incorporating flowchart symbols in flowcharts
* ISO 2709 Format for information exchange (e.g. MARC)
* ISO 2768 Standard for dimensional tolerance in manufacturing
* ISO 3029 Photography — 126-size cartridges — Dimensions of cartridge, film and backing paper [withdrawn 1999-03-18]
* ISO 3082 Iron ores — Sampling and sample preparation procedures
* ISO 3098 Technical product documentation -- Lettering -- Part 0: General requirements
* ISO 3103 Method of brewing tea for the purpose of sensory tests
* ISO 3166 Codes for the representation of names of countries and their subdivisions
o ISO 3166-1 Part 1: Country codes
o ISO 3166-2 Part 2: Country subdivision code
o ISO 3166-3 Part 3: Code for formerly used names of countries
* ISO 3297 International standard serial number (ISSN)
* ISO 3506 Mechanical properties of corrosion-resistant stainless steel fasteners
* ISO 3536 Road vehicles — Safety glazing materials — Vocabulary
* ISO 3537 Road vehicles — Safety glazing materials — Mechanical tests
* ISO 3538 Road vehicles — Safety glazing materials — Method for the determination of solar transmittance
* ISO 3601 Fluid power systems — O-rings
o ISO 3601-1 Inside diameters, cross-sections, tolerances and size identification code (Recently updated)
o ISO 3601-2 Housing dimensions for general applications (Recently updated)
o ISO 3601-4 Anti-extrusion rings (back-up rings) (Recently updated)
* ISO 3602 Romanization of Japanese
* ISO 3632 Quality of Saffron
* ISO 3635:1981 Size designation of clothes — Definitions and body measurement procedure
* ISO 3864 Safety labels
* ISO 3901 International Standard Recording Code (ISRC)
* ISO 3977 Design and procurement standards for gas turbine system applications
* ISO 4074: Natural latex rubber condoms -- Requirements and test methods
* ISO 4157 Subdivision of construction works
o ISO 4157-1: buildings and part of buildings
o ISO 4157-2: room numbers
o ISO 4157-3: room identifiers
* ISO 4179 Ductile iron pipes and fittings for pressure and non-pressure pipelines — Cement mortar lining
* ISO 4217 Currency codes
* ISO 4628 Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance
o ISO 4628-1 : General introduction and designation system
o ISO 4628-3 : Assessment of degree of rusting
* ISO/IEC 4873:1991 8-bit code for information interchange
* ISO 4892 Plastics -- Methods of exposure to laboratory light sources
* ISO 5127 Information and documentation — Vocabulary
* ISO 5167 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full
o ISO 5167-1 Part 1: General principles and requirements
o ISO 5167-2 Part 2: Orifice plates
o ISO 5167-3 Part 3: Nozzles and Venturi nozzles
o ISO 5167-4 Part 4: Venturi tubes
* ISO 5218 Representation of human sexes
* ISO 5455 Technical drawings: scales
* ISO 5457 Technical product documentation -- Sizes and layout of drawing sheets
* ISO 5775 Bicycle tires and rims
* ISO 5800 Photography — Colour negative films for still photography — Determination of ISO speed
* ISO 5964 Guidelines for the Establishment and Development of Multilingual Thesauri
* ISO 5971:1981 Size designation of clothes — Pantyhose
* ISO 6166 Securities and related financial instruments — International securities identification numbering system (ISIN)
* ISO 6194 Rotary-shaft lip-type seals incorporating elastomeric sealing elements
o ISO 6194-5 Identification of visual imperfections
* ISO 6344 Coated abrasives — Grain size analysis
o ISO 6344-1 Part 1: Grain size distribution test
o ISO 6344-2 Part 2: Determination of grain size distribution of macrogrits P12 to P220
o ISO 6344-3 Part 3: Determination of grain size distribution of microgrits P240 to P2500
* ISO 6336 Calculation of load capacity of spur and helical gears
* ISO 6429 Information technology: Control functions for coded character sets
* ISO 6438 Documentation — African coded character set for bibliographic information interchange
* ISO 6579 Microbiological detection of Salmonella spp in food and animal feeding stuffs
* ISO 6594 Cast iron drainage pipes and fittings — Spigot series
* ISO 6709 Standard representation of latitude, longitude and altitude for geographic point locations
* ISO 6946 Building components and building elements — Thermal resistance and thermal transmittance — Calculation method
* ISO 7001 Graphical symbols — Public information symbols
* ISO 7002 Agricultural food products — Layout for a standard method of sampling from a lot
* ISO 7098 Romanization of Chinese
* ISO 7200 Technical product documentation - Data fields in title blocks and document headers
* ISO 7240 Fire detection and alarm systems
* ISO 7372 Trade data interchange
* ISO/IEC 7501-1:1997 Identification cards — Machine readable travel documents (Part 1: Machine readable passport; Part 2: Machine readable visa; Part 3: Machine readable official travel documents)
* ISO 7736 Car radio installation space
* ISO/IEC 7810 Identification cards — Physical characteristics
* ISO/IEC 7811 Identification cards — Recording technique
* ISO/IEC 7812 Identification cards — Identification of issuers
* ISO/IEC 7813 Information technology — Identification cards — Financial transaction cards
* ISO/IEC 7816 Identification cards — Integrated circuit cards
* ISO/IEC 7942 Graphical Kernel System
* ISO 8000 Data quality
* ISO 8090 Cycles — Terminology
* ISO 8180 Ductile iron pipelines — Polyethylene sleeving for site application
* ISO 8373 Manipulating industrial robots — Vocabulary
* ISO 8402 Quality Management and Quality Assurance — Vocabulary
* ISO 8501-1 Preparation of steel substrates before application of paints and related products
* ISO 8554 Hardware for furniture — Terms for furniture locks [withdrawn, 1999-11-11]
* ISO 8555 Hardware for furniture — Terms for furniture fittings
* ISO 8559:1989 Garment construction and anthropometric surveys — Body dimensions
* ISO 8583 Financial transaction card originated messages — Interchange message specifications
o ISO 8583-1 Part 1: Messages, data elements and code values
o ISO 8583-2 Part 2: Application and registration procedures for Institution Identification Codes (IIC)
o ISO 8583-3 Part 3: Maintenance procedures for messages, data elements and code values
* ISO 8601 Data elements and interchange formats — Information interchange — Representation of dates and times
* ISO/IEC 8613 Open Document Architecture
* ISO/IEC 8632 Computer Graphics Metafile
* ISO 8651 Graphical Kernel System language bindings
* ISO/IEC 8652: Information technology — Programming languages — Ada
* ISO 8653:1986 Jewellery — Ring-sizes — Definition, measurement and designation
* ISO 8691 Petroleum products — Low levels of vanadium in liquid fuels — Determination by flameless atomic absorption spectrometry after ashing
* ISO 8805 Graphical Kernel System for Three Dimensions and the C language bindings are ISO 8806
* ISO 8806-4 Graphical Kernel System for Three Dimensions, C language bindings
* ISO 8807: Language Of Temporal Ordering Specification (LOTOS)
* ISO/IEC 8824 Abstract Syntax Notation One (ASN.1)
* ISO/IEC 8825 ASN.1 Encoding Rules
* ISO 8859 8-bit coded character sets
o ISO 8859-1 Latin-1
o ISO 8859-2 Latin-2
o ISO 8859-3 Latin-3 or "South European"
o ISO 8859-4 Latin-4 or "North European"
o ISO 8859-5 Cyrillic
o ISO 8859-6 Arabic
o ISO 8859-7 Greek
o ISO 8859-8 Hebrew
o ISO 8859-9 Latin-5
o ISO 8859-10 Latin-6, rearrangement of 8859-4
o ISO 8859-11 Thai
o ISO 8859-13 Latin-7 or "Baltic Rim"
o ISO 8859-14 Latin-8 or "Celtic"
o ISO 8859-15 Latin-9, revision of 8859-1
o ISO 8859-16 Latin-10 South-Eastern European languages and others
* ISO 8879 Standard Generalized Markup Language (SGML)
* ISO 9000 Quality management system in production environments
* ISO 9001 Quality management
* ISO 9069 SGML support facilities — SGML Document Interchange Format (SDIF)
* ISO/IEC 9075 SQL
* ISO/IEC 9126 Software engineering — Product quality
* ISO 9141 Network interconnection of computers in a vehicle
o ISO 9141-2 OBD-II standard, aka 9141 CARB standard
* ISO 9241 Ergonomic requirements for office work with visual display terminals
* ISO 9362 Bank Identifier Code or BIC system
* ISO 9407 Shoe sizes — Mondopoint system of sizing and marking
* ISO/IEC 9541 Information technology — Font information interchange
o ISO/IEC 9541-1:1991 Information technology — Font information interchange — Part 1: Architecture
o ISO/IEC 9541-2:1991 Information technology — Font information interchange — Part 2: Interchange Format
o ISO/IEC 9541-3:1994 Information technology — Font information interchange — Part 3: Glyph shape representation
* ISO 9564 Banking — Personal Identification Number management and security
* ISO/IEC 9579 Remote database access for SQL
* ISO 9592, ISO 9593 PHIGS (Programmer's Hierarchical Interactive Graphics System)
* ISO/IEC 9594 Information technology — Open Systems Interconnection — The Directory
* ISO 9660 Information processing — Volume and file structure of CD-ROM for information interchange
* ISO/IEC 9796 Information technology — Security techniques — Digital signature schemes giving message recovery
* ISO/IEC 9797 Information technology — Security techniques — Message Authentication Codes (MACs)
* ISO/IEC 9798 Information technology — Security techniques — Entity authentication
* ISO/IEC 9834 Information technology — Open Systems Interconnection — Procedures for the operation of OSI Registration Authorities
* ISO 9869 Thermal insulation — Building elements — In-situ measurements of thermal resistance and thermal transmittance
* ISO 9899 C programming language
* ISO/IEC 9945 Portable Operating System Interface (POSIX)
* ISO 9984 Conversion of Georgian characters into Roman characters
* ISO 9985 Conversion of Armenian characters into Roman characters
* ISO 9992:1999 Financial transaction cards — Security architecture of financial transaction systems using integrated circuit cards
* ISO/IEC 9995 Information technology — Keyboard layouts for text and office systems
* ISO 9999 Technical aids for persons with disabilities. Classification and terminology
* ISO 10006 Quality management — Guidelines to quality in project management
* ISO 10007 Quality management — Guidelines for configuration management
* ISO 10012 Measurement management systems — Requirements for measurement processes and measuring equipment
* ISO/IEC 10021 Message Oriented Text Interchange Systems (MOTIS)
* ISO/IEC 10026 Open Systems Interconnection
* ISO 10077 Thermal performance of windows, doors and shutters — Calculation of thermal transmittance
* ISO/IEC 10089 Information technology; 130 mm rewritable optical disk cartridge for information interchange — 650 MB per cartridge
* ISO 10160 Information and documentation — Open Systems Interconnection — Interlibrary Loan Application Service Definition
* ISO 10161 Information and documentation — Open Systems Interconnection — Interlibrary Loan Application Protocol Specification
* ISO/IEC 10164 Information technology — Open Systems Interconnection — Systems Management
* ISO/IEC 10179:1996 Document Style Semantics and Specification Language (DSSSL)
* ISO 10202:1991 Financial transaction cards — Security architecture of financial transaction systems using integrated circuit cards
* ISO 10206 Extended Pascal (programming language)
* ISO 10211 Thermal bridges in building construction — Heat flows and surface temperatures — Detailed calculations
* ISO 10279 BASIC programming language
* ISO 10303 Industrial automation systems and integration — Product data representation and exchange. Known as STEP, Standard for the Exchange of Product data
* ISO 10383 Securities and related financial instruments — Codes for exchanges and market identification (MIC)
* ISO 10487 Connections for passenger car stereos
* ISO 10628 Flow diagrams for process plants
* ISO 10646 Universal Character Set (equivalent to Unicode's character set)
* ISO 10664 Hexalobular internal driving feature for bolts and screws — Torx screw head
* ISO 10957 Information and documentation — International Standard Music Number (ISMN)
* ISO 10962 Securities and related financial instruments — Classification of Financial Instruments (CFI code)
* ISO 10993 Biological evaluation of medical devices
o ISO 10993-1 Evaluation and testing within a risk management process
o ISO 10993-2 Animal welfare requirements
o ISO 10993-3 Tests for genotoxicity, carcinogenicity and reproductive toxicity
o ISO 10993-4 Selection of tests for interactions with blood
o ISO 10993-5 Tests for in vitro cytotoxicity
o ISO 10993-6 Tests for local effects after implantation
o ISO 10993-7 Ethylene oxide sterilization residuals
o ISO 10993-8 Selection and qualification of reference materials for biological tests [withdrawn 2003-12-15]
o ISO 10993-9 Framework for identification and quantification of potential degradation products
o ISO 10993-10 Tests for irritation and skin sensitization
o ISO 10993-11 Tests for systemic toxicity
o ISO 10993-12 Sample preparation and reference materials
o ISO 10993-13 Identification and quantification of degradation products from polymeric medical devices
o ISO 10993-14 Identification and quantification of degradation products from ceramics
o ISO 10993-15 Identification and quantification of degradation products from metals and alloys
o ISO 10993-16 Toxicokinetic study design for degradation products and leachables
o ISO 10993-17 Establishment of allowable limits for leachable substances
o ISO 10993-18 Chemical characterization of materials
o ISO 10993-19 Physico-chemical, morphological and topographical characterization of materials
o ISO 10993-20 Principles and methods for immunotoxicology testing of medical devices
* ISO 11064 Ergonomic design of control centres
o ISO 11064-1:2000 Part 1: Principles for the design of control centres
o ISO 11064-2:2000 Part 2: Principles for the arrangement of control suites
o ISO 11064-3:1999 Part 3: Control room layout ISO 11064-3:1999/Cor 1:2002
o ISO 11064-4:2004 Part 4: Layout and dimensions of workstations
o ISO 11064-5:2008 Part 5: Displays and controls
o ISO 11064-6:2005 Part 6: Environmental requirements for control centres
o ISO 11064-7:2006 Part 7: Principles for the evaluation of control centres
* ISO/IEC 11172 MPEG-1
* ISO 11170:2003 Hydraulic fluid power — Filter elements — Sequence of tests for verifying performance characteristics
* ISO/IEC 11179 Information Technology — Metadata Registries (MDR)
o ISO/IEC 11179-1:2004 Part 1: Framework
o ISO/IEC 11179-2:2005 Part 2: Classification
o ISO/IEC 11179-3:2003 Part 3: Registry metamodel and basic attributes
o ISO/IEC 11179-4:2004 Part 4: Formulation of data definitions
o ISO/IEC 11179-5:2005 Part 5: Naming and identification principles
o ISO/IEC 11179-6:2005 Part 6: Registration
* ISO 11180 Postal addressing [Withdrawn, 2004-01-15]
* ISO/IEC 11404:1996 Language-independent datatypes (See also General purpose datatypes)
* ISO 11446:2004 Connectors for the electrical connection of towing and towed vehicles — 13-pole connectors for vehicles with 12 V nominal supply voltage
* ISO 11469:2000 Plastics — Generic identification and marking of plastics products
* ISO 11521 Replaced by ISO 15022
* ISO/IEC 11578:1996 Information technology — Open Systems Interconnection — Remote procedure call (RPC)
* ISO 11783 aka. IsoBus — J1939-based communication protocol for the agriculture industry
* ISO/IEC 11801 Information technology — Generic cabling for customer premises
* ISO 11898 Road vehicles — Controller area network (CAN)
* ISO 12006 Building construction. Organization of information about construction works
* ISO 12207 Software lifecycle processes
* ISO 12639 Graphic technology — Prepress digital data exchange — Tag image file format for image technology (TIFF/IT)
* ISO 12641 Graphic technology — Prepress digital data exchange — Colour targets for input scanner calibration
* ISO 13239 High-level data link control (HDLC) procedures
* ISO/IEC 13249 SQL multimedia and application packages
* ISO/IEC 13250 Topic map
* ISO 13346 Volume and file structure of write-once and rewritable media, on which UDF is based
* ISO 13370 Thermal performance of buildings — Heat transfer via the ground — Calculation methods
* ISO 13406 Ergonomic requirements for work with visual displays based on flat panels
o ISO 13406-1:1999 Part 1: Introduction
o ISO 13406-2:1002 Part 2: Ergonomic requirements for flat panel displays
* ISO 13407:1999 Human-centred design processes for interactive systems
* ISO 13450 110 film format
* ISO 13485:2003 Medical Devices — Quality management systems — Requirements for regulatory purposes
* ISO 13490 Information technology: Volume and file structure of read-only and write-once compact disk media for information interchange
* ISO 13567/1 to 3 Technical product documentation; Organization and naming of layers for Computer-aided design (CAD)
* ISO/IEC 13568:2002 Information Technology — Z Formal Specification Notation — Syntax, Type System and Semantics
* ISO 13616 Financial services — International bank account number (IBAN)
* ISO 13628 - Design And Operation Of Subsea Production Systems
o ISO 13628-1 - Part 1: General Requirements And Recommendations
o ISO 13628-2 - Part 2: Unbonded Flexible Pipe Systems For Subsea And Marine
o ISO 13628-3 - Part 3: Through flowline (TFL) systems
o ISO 13628-4 - Part 4: Subsea wellhead and tree equipment
o ISO 13628-5 - Part 5: Subsea Umbilicals
o ISO 13628-6 - Part 6: Subsea Production Control Systems
o ISO 13628-7 - Part 7: Completion/workover Riser Systems
o ISO 13628-8 - Part 8: Remotely Operated Vehicle (rov) Interfaces On Subsea
o ISO 13628-9 - Part 9: Remotely Operated Tool (rot) Intervention Systems
o ISO 13628-10 - Part 10: Specification For Bonded Flexible Pipe
o ISO 13628-11 - Part 11: Flexible Pipe Systems for Subsea and Marine Applications
* ISO 13849-1 Safety of machinery, Safety related parts of control systems, General principles for design
* ISO/IEC 13818 MPEG-2
* ISO 13837 Road vehicles — Safety glazing materials — Method for the determination of solar transmittance
* ISO 14000 Environmental Management Standards in production environments
* ISO 14001 Environmental Management
* ISO 14064 Greenhouse Gases
* ISO 14223 Radiofrequency [sic] identification of animals — Advanced transponders
* ISO 14230 Road vehicles — Diagnostic systems — Keyword Protocol 2000
o ISO 14230-1 Physical layer
o ISO 14230-2 Data link layer
o ISO 14230-3 Application layer
o ISO 14230-4 Requirements for emission-related systems
* ISO/IEC 14443 Identification cards — Contactless integrated circuit(s) cards — Proximity cards
* ISO/IEC 14496 MPEG-4
* ISO 14644 Standards Cleanrooms and associated controlled environments
o ISO 14644-1:1999 Classification of Air Cleanliness
o ISO 14644-2:2000 Testing and Monitoring to prove Compliance
o ISO 14644-3:2005 Metrology & Test Methods
o ISO 14644-4:2001 Design, Construction and Start-up
o ISO 14644-5:2004 Operations
o ISO 14644-6:2007 Vocabulary
o ISO 14644-7:2004 Separative Devices
o ISO 14644-8:2006 Classification of Airborne Molecular Contamination
o ISO 14644-9 Clean Surfaces
* ISO 14651 Information technology: International string ordering and comparison
* ISO 14698 Standards
o ISO-14698-1 Bio-contamination Control — General Principles
o ISO-14698-2 Evaluation & Interpretation of Bio-contamination Data
* ISO 14750 Information technology — Open Distributed Processing — Interface Definition Language
* ISO/IEC 14755 Input methods to enter unicode characters from ISO/IEC 10646
* ISO 14855-1:2005 Aerobic Biodegradation under controlled composting conditions
* ISO 14855-2:2007 Aerobic Biodegradation under controlled composting conditions with gravimetric measurement of carbon dioxid
* ISO/IEC 14882 Programming Languages — C++
* ISO 14915 Software ergonomics for multimedia user interfaces
o ISO 14915-1:2002 Part 1: Design principles and framework
o ISO 14915-2:2003 Part 2: Multimedia navigation and control
o ISO 14915-3:2002 Part 3: Media selection and combination
* ISO 14971:2007 Medical Devices — Application Of Risk Management To Medical Devices
* ISO/IEC 14977 Extended Backus-Naur Form (EBNF)
* ISO 15000 Electronic business eXtensible Markup Language ebXML
o ISO 15000-1:2004 Part 1: Collaboration-protocol profile and agreement specification (ebCPP)
o ISO 15000-2:2004 Part 2: Message service specification (ebMS)
o ISO 15000-3:2004 Part 3: Registry information model specification (ebRIM)
o ISO 15000-4:2004 Part 4: Registry services specification (ebRS)
o ISO 15000-5:2005 Part 5: ebXML Core Components Technical Specification, Version 2.01(ebCCTS)
* ISO 15022 Securities: Scheme for messages(Data Field Dictionary)
* ISO 15082 Road vehicles — Tests for rigid plastic safety glazing materials
* ISO 15099 Thermal performance of windows, doors and shading devices — Detailed calculations
* ISO 15112 Natural gas — Energy determination
* ISO 15189 Medical laboratories — Particular requirements for quality and competence
* ISO 15288 Systems engineering — System life cycle processes
* ISO 15289 Systems and software engineering — Content of systems and software life cycle process information products (Documentation)
* ISO/IEC 15291: Information technology — Programming languages — Ada Semantic Interface Specification (ASIS)
* ISO 15403 Natural gas — Natural gas for use as a compressed fuel for vehicles
o ISO 15403-1 Designation of the quality
* ISO/IEC 15408 Common Criteria — Evaluation Criteria for Information Technology Security
* ISO/IEC 15434 Information technology — Automatic Identification and Data Capture Techniques - Syntax for High-Capacity ADC Media. For example: Data Matrix 2D barcode
* ISO/IEC 15444 JPEG 2000
* ISO/IEC 15445:2000 ISO HTML, a subset of Hypertext Markup Language (HTML) 4
* ISO/IEC 15504 Framework for the assessment of software processes, also known as SPICE (Software Process Improvement and Capability Determination)
* ISO 15614-13:2002 Specification and qualification of welding procedures for metallic materials-Welding procedure test
* ISO 15686 Service life planning for constructive works in 10 parts
* ISO/IEC 15693 Identification cards — Contactless integrated circuit(s) cards — Vicinity cards
* ISO 15706 International Standard Audiovisual Number
* ISO 15707 International Standard Musical Work Code
* ISO 15836 The Dublin Core metadata element set
* ISO 15897 Standard for the registration of new POSIX locales and POSIX charmaps
* ISO 15924 Codes for the representation of names of scripts
* ISO 15930 Graphic technology — Prepress digital data exchange using PDF
* ISO/IEC 15948:2003 Portable Network Graphics (PNG)
* ISO 15970 Natural gas — Measurement of properties — Volumetric properties: density, pressure, temperature and compression factor
* ISO 15971 Natural gas. Measurement of properties. Calorific value and Wobbe index
* ISO/IEC 16500 Generic Digital Audio-Visual Systems DAVIC
* ISO 16071:2003 Ergonomics of human-system interaction, Guidance on accessibility for human-computer interfaces
* ISO 16134 Earthquake- and subsidence-resistant design of ductile iron pipelines
* ISO 16232 Road vehicles — Cleanliness of components of fluid circuits
o ISO 16232-8 Particle nature determination by microscopic analysis
o ISO 16232-9 Particle sizing and counting by automatic light extinction particle counter
o ISO 16232-10 Expression of results
* ISO/IEC 16262 ECMAScript
* ISO 16549 Textiles — Unevenness of textile strands — Capacitance method
* ISO 16750 Road vehicles — Environmental conditions and testing for electrical and electronics equipment
* ISO/TS 16949 Quality management systems — Particular requirements for the application of ISO 9001:2000 for automotive production and relevant service part organizations
* ISO 16982:2002 Ergonomics of human-system interaction, Usability methods supporting human-centred design
* ISO/IEC 17020:1998 General criteria for the operation of various types of bodies performing inspection
* ISO/IEC 17024:2003 specifies requirements for a body certifying persons against specific requirements, including the development and maintenance of a certification scheme for personnel
* ISO/IEC 17025 General requirements for competence of test and calibration laboratories
* ISO 17202 Textiles — Determination of twist in single spun yarns — Untwist/retwist method
* ISO 17776 : Petroleum industries
* ISO/IEC 17799 Information technology: Code of practice for information security management
* ISO/IEC 17894 Ships and marine technology — Computer applications — General principles for development and use of PES in marine applications
* ISO/IEC 18000 Information Technology AIDC Techniques-RFID (Radio Frequency Identification) for Item Management — Air Interface
o 18000-1 Part 1 — Generic Parameters for the Air Interface for Globally Accepted Frequencies
o 18000-2 Part 2 — Parameters for Air Interface Communications below 135 kHz
o 18000-3 Part 3 — Parameters for Air Interface Communications at 13.56 MHz
o 18000-4 Part 4 — Parameters for Air Interface Communications at 2.45 GHz
o 18000-5 Part 5 — Parameters for Air Interface Communications at 5.8 GHz (Withdrawn)
o 18000-6 Part 6 — Parameters for Air Interface Communications at 860 to 960 MHz
o 18000-7 Part 7 — Parameters for Air Interface Communications at 433 MHz
* ISO/IEC 18004: QR Code Standardization
* ISO/IEC 18009: Information technology — Programming languages — Ada: Conformity assessment of a language processor (ACATS)
* ISO/IEC 18013 Information technology — Personal Identification — ISO-compliant driving license
o ISO/IEC 18013-1:2005(E) Part 1: Physical characteristics and basic data set
o ISO/IEC 18013-2:2008(E) Part 2: Machine-readable technologies
o ISO/IEC 18013-3:2009(E) Part 3: Access control, authentication and integrity validation
* ISO/IEC 18014 Information technology — Security techniques — Time-stamping services
* ISO/IEC 18023:2006(E) Information technology — SEDRIS —
o ISO/IEC 18023-1:2006(E) Information technology — SEDRIS — Part 1: Functional specification
o ISO/IEC 18023-2:2006(E) Information technology — SEDRIS — Part 2: Abstract transmittal format
o ISO/IEC 18023-3:2006(E) Information technology — SEDRIS — Part 3: Transmittal format binary encoding
* ISO/IEC 18024-4:2006(E) Information technology — SEDRIS language bindings — Part 4: C
* ISO/IEC 18025:2005(E) Information technology — Environmental Data Coding Specification (EDCS)
* ISO/IEC 18026:2006(E) Information technology — Spatial Reference Model (SRM)
* ISO/IEC 18033 Information technology — Security techniques — Encryption algorithms
o Part 1: General
o Part 2: Asymmetric ciphers
o Part 3: Block ciphers
o Part 4: Stream ciphers
* ISO/IEC 18041-4:2005(E) Information technology — EDCS language bindings — Part 4: C
* ISO/IEC 18042-4:2006(E) Information technology — Spatial Reference Model (SRM) language bindings — Part 4: C
* ISO/IEC 18092 Information technology — Telecommunications and information exchange between systems — Near Field Communication — Interface and Protocol (NFCIP-1)
* ISO 18152:2003 Ergonomics of human-system interaction, Specification for the process assessment of human-system issues
* ISO 18185: Wireless standard for electronic seals using active RFID (Radio Frequency Identification)
* ISO 18245 standard concerning the assignment of Merchant Category Codes (MCC) in retail financial services
* ISO 18529:2000 Ergonomics of human-system interaction, Human-centred lifecycle process descriptions (available in English only)
* ISO 18629 standardized Process Specification Language (PSL)
* ISO 19005 Document management — Electronic document file format for long-term preservation
* ISO 19011 standard providing guidelines for quality and environmental management systems auditing
* ISO 19092-1 Financial Services — Security — Part 1: Security framework
* ISO 19092-2 Financial Services — Security — Part 2: Message syntax and cryptographic requirements
* ISO 19101 Geographic Information: Reference model
* ISO 19105 Geographic Information: Conformance and testing
* ISO 19107 Geographic Information: Spatial schema
* ISO 19108 Geographic Information: Temporal schema
* ISO 19109 Geographic Information: Rules for Application Schema
* ISO 19110 Geographic Information: Feature cataloguing methodology
* ISO 19111 Geographic Information: Spatial referencing by coordinates
* ISO 19111 Geographic Information: Spatial referencing by identifier
* ISO 19113 Geographic Information: Quality principles
* ISO 19114 Geographic Information: Quality evaluation procedures
* ISO 19115 Geographic Information: Metadata
* ISO 19123 Geographic Information: Coverage schema
* ISO 19128 Geographic Information: Web Map Service
* ISO 19131 Geographic Information: Data product specification
* ISO 19136 Geographic Information: Geography Markup Language
* ISO 19439 Framework for enterprise modelling
* ISO 19440 Constructs for enterprise modelling
* ISO/IEC 19501 Unified Modeling Language (UML)
* ISO/IEC 19502 Meta-Object Facility (MOF)
* ISO/IEC 19503 XML Metadata Interchange (XMI)
* ISO/IEC 19757 Document Schema Definition Languages (DSDL)
o ISO/IEC FDIC 19757-2 Regular-grammar-based validation RELAX NG
o ISO/IEC 19757-3 Rule-based validation — Schematron
o ISO/IEC 19757-4 Namespace-based Validation Dispatching Language (NVDL)
* ISO/IEC 19770 Information technology — Software asset management
* ISO/IEC 19785 Common Biometric Exchange Formats Framework (CBEFF 2.0)
* ISO/IEC 19790 Security requirements for cryptographic modules (see also FIPS 140)
* ISO/IEC 19794 Information technology — Biometric data interchange formats
o ISO/IEC 19794-1:2006 Part 1: Framework
o ISO/IEC 19794-2:2005 Part 2: Finger minutiae data
o ISO/IEC 19794-3:2006 Part 3: Finger pattern spectral data
o ISO/IEC 19794-4:2005 Part 4: Finger image data
o ISO/IEC 19794-5:2005 Part 5: Face image data
o ISO/IEC 19794-6:2005 Part 6: Iris image data
o ISO/IEC 19794-7:2007 Part 7: Signature/sign time series data
o ISO/IEC 19794-8:2006 Part 8: Finger pattern skeletal data
o ISO/IEC 19794-9:2007 Part 9: Vascular image data
o ISO/IEC 19794-10:2007 Part 10: Hand geometry silhouette data
* ISO/IEC 20000:2005 IT Service Management System (based on BS15000)
* ISO 20022 Financial Services — universal financial industry message scheme
* ISO/IEC TR 20943 Information technology — Procedures for achieving metadata registry content consistency
o ISO/IEC TR 20943-1:2003 Part 1: Data elements
o ISO/IEC TR 20943-3:2004 Part 3: Value domains
* ISO/IEC 21000 Information technology -- Multimedia framework (MPEG-21)
* ISO/IEC 21481 Information technology — Telecommunications and information exchange between systems — Near Field Communication Interface and Protocol -2 (NFCIP-2)
* ISO 21482 Ionizing-radiation warning -- Supplementary symbol
* ISO 22000 Food safety management systems — Requirements for any organization in the food chain
o ISO/TS 22003 Food safety management systems — Requirements for bodies providing audit and certification of food safety management systems
* ISO 22093 Industrial automation systems and integration -- Physical device control -- Dimensional Measuring Interface Standard (DMIS)
* ISO 22241 : Diesel engines — NOx reduction agent AUS 32
o ISO 22241-1 : Quality requirements
o ISO 22241-2 : Test methods
o ISO 22241-3 : Handling, transportation and storing
* ISO/IEC TR 22250 Regular Language description for XML — (RELAX)
o ISO/IEC TR 22250-1:2002 RELAX Core
* ISO/PAS 22399:2007 Social security — Guideline for incident preparedness and operational continuity management
* ISO 22716:2007: Cosmetics — Good Manufacturing Practices (GMP) — Guidelines on Good Manufacturing Practices
* ISO/IEC 23003-1 : MPEG Surround (aka MPEG-D)
* ISO/IEC 23270:2003 C# programming language
* ISO/IEC 23360 Linux Standard Base (LSB) core specification 3.1 (in publication as of 2005-12)
o ISO/IEC 23360-1 — Part 1: Generic specification
o ISO/IEC 23360-2 — Part 2: Specification for IA32 architecture
o ISO/IEC 23360-3 — Part 3: Specification for IA64 architecture
o ISO/IEC 23360-4 — Part 4: Specification for AMD64 architecture
o ISO/IEC 23360-5 — Part 5: Specification for PPC32 architecture
o ISO/IEC 23360-6 — Part 6: Specification for PPC64 architecture
o ISO/IEC 23360-7 — Part 7: Specification for S390 architecture
o ISO/IEC 23360-8 — Part 8: Specification for S390X architecture
* ISO 23733 Textiles — Chenille yarns — Test method for the determination of linear density
* ISO 23950 Library standard ANSI/NISO Z39.50 — Protocol for searching and retrieving information, usually from bibliographic records
* ISO/IEC 24707:2007 Information technology — Common Logic (CL): a framework for a family of logic-based languages
* ISO/IEC 24727 Identification cards — Integrated circuit card programming interfaces
o ISO/IEC 24727-1 — Part 1: Architecture
o ISO/IEC 24727-2 — Part 2: Generic card interface
o ISO/IEC 24727-3 — Part 3: Application interface
o ISO/IEC 24727-4 — Part 4: Application programming interface (API) administration
o ISO/IEC CD 24727-5 — Part 5: Testing
o ISO/IEC FCD 24727-6 — Part 6: Registration authority procedures for the authentication protocols for interoperability
* ISO/IEC 24744:2007 Software Engineering — Metamodel for Development Methodologies
* ISO/IEC 24762:2008 Information technology — Security techniques — Guidelines for information and communications technology disaster recovery services
* ISO/IEC DIS 25961 Recommended Practice for Architectural Description of Software-Intensive Systems. See IEEE 1471
* ISO 26000 Guidance on social responsibility
* ISO/IEC 26300 OpenDocument Format (ODF)
* ISO/IEC 27000-series Information security management system family of standards
o ISO/IEC 27000 Information security management systems — Overview and vocabulary
o ISO/IEC 27001 Information security management systems — Requirements
o ISO/IEC 27002 Code of practice for information security management
o ISO/IEC 27003 Information security management system implementation guidance
o ISO/IEC 27004 Information security management — Measurement
o ISO/IEC 27005 Information security risk management
o ISO/IEC 27006 Requirements for bodies providing audit and certification of information security management systems
o ISO/IEC 27007 Guidelines for information security management systems auditing
o ISO/IEC 27011 Information security management guidelines for telecommunications organizations based on ISO/IEC 27002
* ISO/PAS 28000 - Specification for security management systems for the supply chain
o ISO/PAS 28004 - Guidelines for the implementation of ISO/PAS 28000
* ISO/IEC 29119 Software Testing[4]
o ISO/IEC 29119-1 — Part 1: Concepts & Vocabulary
o ISO/IEC 29119-2 — Part 2: Test Process
o ISO/IEC 29119-3 — Part 3: Test Documentation
o ISO/IEC 29119-4 — Part 4: Test Techniques
* ISO/IEC 29500 Office Open XML
o ISO/IEC 29500-1 — Part 1: Fundamentals and Markup Language Reference
o ISO/IEC 29500-2 — Part 2: Open Packaging Conventions
o ISO/IEC 29500-3 — Part 3: Markup Compatibility and Extensibility
o ISO/IEC 29500-4 — Part 4: Transitional Migration Features
ISO 30000–ISO 39999
* ISO 31000 Risk management
* ISO 32000 Document management — Portable document format
* ISO/IEC 38500 Corporate governance of information technology
ISO 80000
* ISO/IEC 80000 Quantities and units
thanks you for your good efforts
ReplyDeleteThis blog post is really great; the standard stuff of the post is genuinely amazing. uk area codes list
ReplyDelete