Indicator and Test Papers
Indicator and test papers are strips of filter paper of suitable dimension and grade impregnated with an indicator or a reagent that is sufficiently stable to provide a convenient form of the impregnated substance. Commercial samples of indicator and test papers are available and may be used. Those required in the assays and tests of the Pharmacopoeia may be prepared as described in the following paragraphs.Cut the paper into strips of suitable size and store in well closed, light-resistant containers, protected from moisture.
Lead Acetate Paper: Prepare from lead acetate solution and dry the impregnated paper at 100°, avoiding contact with metal.
Litmus Paper: Use red litmus paper or blue litmus paper, as appropriate.
Litmus Paper, Blue: Boil 10 parts of coarsely powdered litmus under a reflux condenser for 1 hour with 100 parts of ethanol (95 percent), decant the ethanol and discard. To the residue add a mixture of 45 parts of ethanol (95 percent) and 55 parts of water. After 2 days, decant the clear liquid. Impregnated strips of filter paper with the extract and allow to dry. Complies with the following test.
SENSITIVITY: Immerse a strip, 60 mm x 10 mm, in 100 ml of 0.002 M hydrochloric acid. On shaking, the paper turns red within 45 seconds.
Litmus Paper, Red: To the extract obtained in the preparation of blue litmus paper add 2 M hydrochloric acid dropwise until the blue solution turns red. Impregnated strips of filter paper with the solution and allow to dry. Complies with the following test.
SENSITIVITY: Immerse a strip, 60 mm x 10 mm in 100 ml of 0.002 M sodium hydroxide. On shaking, the paper turns blue within 45 seconds.
Mercuric Chloride Paper: Smooth white filter paper, not less than 25 mm in width, soaked in a saturated solution of mercuric chloride, pressed to remove the superfluous solution and dried at about 60° in the dark. The grade of filter paper is such that the weight is between 65 and 120 g per sq.m; the thickness in mm of 400 papers is approximately equal, numerically, to the weight in g per sq.m.
Store in a stoppered bottle in the dark. The paper which has been exposed to sunlight or to the vapor of ammonia affords a lighter stain or no stain at all when employed in the limit test for arsenic.
Starch Iodide Paper; Starch-iodide Paper: Prepare from a mixture of equal volumes of starch solution and 5 percent w/v solution of potassium iodide in water and dry the impregnated paper protected from light. Complies with the following test.
SENSITIVITY: Mix 0.05 ml of 0.1 M sodium nitrite with 4 ml of hydrochloric acid and dilute with water to 100 ml. Deposit one drop of the resulting solution on the paper; a blue spot appears.
Titan Yellow Paper: Impregnate filter paper with titan yellow solution and dry at room temperature.
No comments:
Post a Comment
Please don't spam. Comments having links would not be published.