Facility Qualification in Pharmaceuticals

Civil Construction

1. Check the room number allotted as per the drawing and design.
2. Check the number of doors and type of the door.
3. Check whether the floor as per the design specification. Whether it is Trimix or Epoxy.
4. Check the vision panel. Whether it is double glazed or single glazed.
5. Check the false ceiling and its material of construction.
6. Check the wall finish and type of the paint used.

7. Check coving, the material of construction of coving and location i.e. between floor and wall and between the ceiling and the wall. Check for the skirting on the wall.
8. Check whether there is any hatch provided. Describe its location.
9. Check the dimension of the room. Whether it is flameproof or non-flameproof. Also, check the size of the room and whether it is as per the design specification.

Utility

1. Power: Check the location of the connections and its voltage and phase with the design specification.
2. Water: Check supply of potable, domestic hot and purified water supply and the number of points.
3. Steam: Check availability of low-pressure steam and number of points.
4. Gas/compressed air: Check compressed air connection and number of points.
5. Drains: Check the number of drain points and type of drain trap.
6. HVAC supply & return diffusers: Check for the number of supply and return air diffusers. Also, record the temperature and humidity. Compare with that of the design specification.
7. Lighting: Check the type of light fixture. Whether it is flameproof or non-flameproof. Also, check and record the intensity of light.
8. Dust extractor system: Check the number of the dust extractor points.
9. Equipment: Record all the pieces of equipment are installed in the area.

10. Check all the safety systems such as alarm push button, the location of closest fire extinguisher, fire detection system, eyewash station, intercom/ telephone and its location.
11. Attach all related drawings of the area and their availability with revision status. Prepare a summary report of qualification and shall be reviewed. Variance has to be recorded.
12. The final report of the qualification shall be reviewed and conclusion should be drawn by head of production and head of quality control and quality assurance.
Related: Separate Manufacturing Facility is Required for Manufacturing of Penicillin and Non-penicillin Products

Get ready to use editable documents in MS-Word FormatView List

Share

Tweet

Share

Share